HULL GARD® INFLATABLE VINYL FENDER (TAYLOR)
Oval-shaped design minimizes rolling motion and reduces hull rub. Molded-in eyelets withstand the constant pull and tug of everyday usage. Molded-in inflation valves allow you to customize the pressure for maximum effectiveness. Extra soft, tough and shiny. Valve seats are integrally molded into the fender, not glued in.
Height: 8.5
Width: 8.5
Length: 27
Weight: 5.25
STORM GARD FENDERS (TAYLOR)
Our team of engineers has spent countless hours creating our patented True Color pearlescent-infused Storm Gard fenders. Pearlescent color mixes match the most popular colors used in today’s gelcoats and trim. Our patented color enhancement process provides deeper richer colors. Integrated color agents add luster in the sunlight. The ultimate finishing touch for your boat. Made in the USA. Lifetime Guarantee.
Height: 6
Width: 6
Length: 23
Weight: 2.2
BUOY HARDWARE (TAYLOR)
1/2″ diameter hot-dipped galvanized rod with 4″ long swivel, 2 galvanized washers and nylon care lock nut.
Height: 0.5
Width: 3.5
Length: 29.5
Weight: 3
200 QT. COOLER WITH OPTIMAXX™ INSULATION (COLEMAN)
- 7-day ice retention
- UV reflective color additive
- Antimicrobial liner
- Stainless steel hinge and lid spring strap
- Locking lid latch
- Self-draining cup holders
- Threaded drain
- Tray for inner storage
- Non-skid corners and stainless steel lashing posts
- Holds up to 327 cans
- 7-day ice retention
- Antimicrobial liner
- UV reflective color additive
- Stainless steel hinge and lid spring strap
- Locking lid latch
- Self-draining cup holders
- Threaded drain
- Tray for inner storage
- Non-skid corners and stainless steel lashing posts
- Holds up to 327 cans
Height: 20.4
Width: 22.59
Length: 50.369999
Weight: 59
PLUG & SOCKET (POWERWINCH)
Plug & Socket
Height: 8
Width: 4.5
Length: 10.25
Weight: 1
THE SPOILER™ INFLATABLE LOW DRAG BUOYS (TAYLOR)
Everything about The Spoiler is carefully designed to give fishing operations optimal buoy performance over the long haul.
The Spoiler’s unique, more rounded shape produces greater buoyancy and lower drag when compared with other well known makes. Ribbed design also helps keep drag to an absolute minimum. Independent testing shows that The Spoiler has on average 82% less drag than conventional round buoys. Stable color formulation protects against sun and ensures buoy will never fade to white.
Height: 10.5
Width: 18
Length: 10.5
Weight: 3.33
SPORT/DIVER/BASSBOAT LADDER MOUNTING HARDWARE (GARELICK)
Sport/Diver Ladder Transom Bracket
Height: 3.75
Width: 1.38
Length: 2.5
Weight: 1
TUFF END™ INFLATABLE VINYL FENDER (TAYLOR)
Solid vinyl ends for extra strength. Dual purpose bivalve construction. Inflate with hand pump and football-type pin or simply remove screw-in tri-valve and use foot pump or similar high pressure device. Removal also allows rapid deflation. Recommended inflation is 2 PSI. High performance and looks great.
Height: 24
Width: 24
Length: 57
Weight: 29.200001
STORM GARD FENDERS (TAYLOR)
Our team of engineers has spent countless hours creating our patented True Color pearlescent-infused Storm Gard fenders. Pearlescent color mixes match the most popular colors used in today’s gelcoats and trim. Our patented color enhancement process provides deeper richer colors. Integrated color agents add luster in the sunlight. The ultimate finishing touch for your boat. Made in the USA. Lifetime Guarantee.
Height: 8
Width: 8
Length: 26
Weight: 4.2
BACK-TO-BACK CLOTH SEAT COVER (TAYLOR)
These soft, terry cloth lounge seat covers are designed to protect your seats from damaging UV, wind, mildew, and water to keep them from cracking and fading. They are completely washable and have an elastic hem for a secure fit.
Height: 4
Width: 9
Length: 10
Weight: 3.405
SWIVEL SPIDER SEAT MOUNT – RIBBED SERIES (GARELICK)
Full 360? rotation. Twist control drag affords selected drag for rotation. Internal delrin bearing cup engages in 10 degree increments for positive lock when tightening. Dual quick lock handles – lever actuated, positive lock engages immediately. For use with any 2-7/8″ diameter fluted stanchion pedestal seat base. Meets ABYC-H31, Type A seating standards.
Height: 5
Width: 7.13
Length: 9
Weight: 4
THE SPOILER™ INFLATABLE LOW DRAG BUOYS (TAYLOR)
Everything about The Spoiler is carefully designed to give fishing operations optimal buoy performance over the long haul.
The Spoiler’s unique, more rounded shape produces greater buoyancy and lower drag when compared with other well known makes. Ribbed design also helps keep drag to an absolute minimum. Independent testing shows that The Spoiler has on average 82% less drag than conventional round buoys. Stable color formulation protects against sun and ensures buoy will never fade to white.
Height: 10.5
Width: 18
Length: 10.5
Weight: 3.33
HULL GARD® INFLATABLE VINYL FENDER (TAYLOR)
Oval-shaped design minimizes rolling motion and reduces hull rub. Molded-in eyelets withstand the constant pull and tug of everyday usage. Molded-in inflation valves allow you to customize the pressure for maximum effectiveness. Extra soft, tough and shiny. Valve seats are integrally molded into the fender, not glued in.
Height: 4.5
Width: 4.5
Length: 16
Weight: 1.27
DOCK PRO™ SMALL EDGE GARD (TAYLOR)
Double molded vinyl dock edging is molded twice then molecularly bonded for extra durability and protection. A tough inner core is surrounded with our soft white vinyl for extra cushion against tough docks. Each piece installs easily to the edges of dock piers or floats with screws or nails.
Height: 2.5
Width: 24
Length: 24
Weight: 13
THE SPOILER™ INFLATABLE LOW DRAG BUOYS (TAYLOR)
Everything about The Spoiler is carefully designed to give fishing operations optimal buoy performance over the long haul.
The Spoiler’s unique, more rounded shape produces greater buoyancy and lower drag when compared with other well known makes. Ribbed design also helps keep drag to an absolute minimum. Independent testing shows that The Spoiler has on average 82% less drag than conventional round buoys. Stable color formulation protects against sun and ensures buoy will never fade to white.
Height: 10.5
Width: 18
Length: 10.5
Weight: 3.33
BOAT STAND TOPS ONLY (BROWNELL BOAT STANDS)
Pontoon V-Top Only
Height: 10
Width: 6
Length: 16
Weight: 20
RIGID DOCK ROLLER WHEEL (TAYLOR)
Plastic dock wheels are designed for roll-in docks and boat lifts. Made of UV stabilized heavy duty, rotomolded polyethylene. Large diameter rolls easily on all terrains. Designed for maximum strength with no maintenance requirements. Pre drilled with drain holes. Fits axle sizes 1.60″ to 1.90″ diameter.
Height: 6
Width: 24
Length: 24
Weight: 8
2-7/8″ FIXED HEIGHT PEDESTAL SERIES – SMOOTH SERIES (GARELICK)
Stanchion tube, 9.25″ diameter 6 hole base plate. Provides solid base of support for a variety of seat hardware. Anodized protective finish. Mounts Garelick fore and aft seat slides and 360° swivel spider combinations. Accepts seat slides: 22000, 75080, 75081, 75082 and 75083. Swivel spiders: 99023, and 99036.
Height: 12.5
Width: 9.38
Length: 9.38
Weight: 4.5
TUFF END™ INFLATABLE VINYL BUOY (TAYLOR)
Tuff End fender ends are made from injection molded vinyl tested to 2000 psi tensile strength. Features
large line holes that will accept standard shackles. The curved design hole prevents chafing.
Height: 15
Width: 15
Length: 20
Weight: 5.733
SUR-MOOR™ T3C™ BUOY (TAYLOR)
Hard skin mooring buoys have a seamless and tough, one-piece polyethylene shell. Hard skin shells feature ultraviolet light absorbers for long-term life under the sun. Filled with EPS foam to positively displace water. Tube-through-the-center design. Three-Year Flotation warranty. Textured finish to enhance paint adhesion.
- The “ET” models have:
- Extended tube is 2.5″ high off the top of the ball
- Extended tube is reinforced with secondary schedule 40 (double thickness) and rolled over for extra strength
- Tube is drilled with a 21/64″ hole 3/4″ down from top to easily secure chain if desired
Height: 31
Width: 28
Length: 31
Weight: 40
POST BUMPER (TAYLOR)
Great protection for pipe supported type docks. Molded from marine grade vinyl with an inflation valve to adjust firmness. Slides over 1-1/2″ dock pipe.
Height: 6
Width: 6
Length: 15
Weight: 4.166
BOAT COVER SUPPORT POLE (TAYLOR)
Extend the life of your boat cover by preventing water from pooling on top. Includes a non-marring tip on each end of the telescoping aluminum pole and a durable plastic adjustment knob for easy height adjustment.
Height: 2.25
Width: 4
Length: 40.5
Weight: 2.5
BACK-TO-BACK CLOTH SEAT COVER (TAYLOR)
These soft, terry cloth lounge seat covers are designed to protect your seats from damaging UV, wind, mildew, and water to keep them from cracking and fading. They are completely washable and have an elastic hem for a secure fit.
Height: 4
Width: 9
Length: 10
Weight: 3.405
MERMAID FENDER (TAYLOR)
Made of soft white vinyl with inflation valve. No boat is complete without the lady on board.
Height: 5
Width: 11
Length: 24
Weight: 1.666
PIRATE HEAD FLAGS (TAYLOR)
Taylor 12″ x 18″ Pirate Wench Gone Wild Flag.
Height: 1.25
Width: 5
Length: 8
Weight: 0.92
REPLACEMENT CABLE (POWERWINCH)
Galvanized cable and hook for Powerwinch trailer winches or other common applications.
Height: 9
Width: 10
Length: 10
Weight: 23
URBAN SOFT COOLERS (COLEMAN)
Soft coolers that won’t collapse under pressure
- Removable hard liner to use with or without ice
- Heat-Welded seams prevent leaks
- Front zippered pocket
Height: 12.4
Width: 7.87
Length: 11.81
Weight: 1.314
ACCESS DOOR (SHRINKWRAP)
Features zipper closure.
Height: 3
Width: 18
Length: 30
Weight: 3.333
STOW ‘N GO DOCK & PATIO STORAGE BOX (TAYLOR)
A durable polyethylene box that’s perfect for your dock, pool or patio. These boxes are manufactured with the highest quality U V-resistant polyethylene resin and is 100% maintenance-free. The double-walled lid is secured with a stainless latch, creating a weather proof design to ensure your contents remain protected and dry.
Height: 21
Width: 20
Length: 40
Weight: 34
DOCK PRO™ DOCK CART (TAYLOR)
Curved handle design reduces bending-over, making the Dock Pro dock cart easier to handle than conventional carts, while the unique angled tub feature provides better leg clearance for maneuvering. The Dock Pro dock cart is simply the easiest way to carry all your gear from the car to the boat. Features a spacious 7 cu. ft. heavy wall roto-molded poly-tub that will not rust or rot. Zinc coated corrosion resistant hardware used throughout. Plastic rim 20″ pneumatic wheels with roller bearings will stand up to the harshest marine environment.
Height: 13
Width: 28
Length: 46
Weight: 35
HEAVY-DUTY FILM RACK (SHRINKWRAP)
Height: 1
Width: 1.5
Length: 3
Weight: 280
OFFSHORE PRO SERIES™ MARINE COOLER (COLEMAN)
- Insulation retains ice for six days in temperatures up to 90° F
- Antimicrobial additive helps resist the growth of odor, mold and mildew
- Built in UV inhibitor helps prevents yellowing
- Comfort grip over molded handles
- Stainless steel spring lid straps
- Tray cutting board also works as divider
- Rust proof stainless steel screws and hinges
- Rust proof leak resistant threaded channel drain with drain valve
- UV inhibitors added to white cooler
- Antimicrobial liner resists odor, mildew and fungus
- Stainless steel screws and hinges
- Stainless steel cable lid strap to prevent hinge over-extension
- 1 tray and 1 divider
- Integrated fish ruler & cup holders molded into the lid
- No-crush comfort over-molded handles
- Hale?s Navy color accents on liner and handles
- Keeps the Ice!™ up to 6 days
- 3000003701 36 Qt. cooler keeps cold for up to 5 days
Height: 36.099998
Width: 16.9
Length: 18
Weight: 22.9
STORM GARD FENDERS (TAYLOR)
Our team of engineers has spent countless hours creating our patented True Color pearlescent-infused Storm Gard fenders. Pearlescent color mixes match the most popular colors used in today’s gelcoats and trim. Our patented color enhancement process provides deeper richer colors. Integrated color agents add luster in the sunlight. The ultimate finishing touch for your boat. Made in the USA. Lifetime Guarantee.
Height: 8
Width: 8
Length: 26
Weight: 4.2
SPORT/DIVER/BASSBOAT LADDER MOUNTING HARDWARE (GARELICK)
Sport/Diver Ladder Transom Extension Shim, 2″
Height: 4
Width: 4
Length: 6
Weight: 3
STORM GARD FENDERS (TAYLOR)
Our team of engineers has spent countless hours creating our patented True Color pearlescent-infused Storm Gard fenders. Pearlescent color mixes match the most popular colors used in today’s gelcoats and trim. Our patented color enhancement process provides deeper richer colors. Integrated color agents add luster in the sunlight. The ultimate finishing touch for your boat. Made in the USA. Lifetime Guarantee.
Height: 5
Width: 5
Length: 20
Weight: 1.7
MOTOR BOAT STAND WITH TOP (BROWNELL BOAT STANDS)
Stackable and the most modern, inexpensive, safe method of shoring up boats. They are easily adjusted. Have angled iron tread plates to prevent damage to pavement. Full length center pipe on all sizes for stability and thread protection. All bases are totally submerged in paint to ensure full coverage inside and out.
Height: 25
Width: 20
Length: 20
Weight: 20
ADJUSTABLE BOAT COVER SUPPORT POLE (GARELICK)
Support your boat cover canvas with this telescoping support pole with a rubber base. Anodized aluminum helps prevent salt water corrosion and weathering. Quick lock fitting for fast, easy adjustment.
Height: 37.25
Width: 3.25
Length: 4.75
Weight: 1
DOCK PRO™ VINYL DOCK BUMPERS (TAYLOR)
Protects the side and the top of the dock with a 1-1/4″ cushion above dock level. Made from the same tough marine grade vinyl as the TAYLOR fenders. Superior cushioning protects boats and docks from each other.
Height: 2.5
Width: 2.5
Length: 18
Weight: 1.833
Taylor Anchor/Mooring Parts & Accessories
Black polypropylene flotation collar keeps the D-Icer on the surface for aeration of ponds and lakes with 4 connections to tie it off and keep it in place. Can also be used in conjunction with a nozzle to create a fountain.
Height: 10
Width: 24
Length: 24
Weight: 15
DOCK PRO™ COMMERCIAL GRADE DOUBLE MOLDED DOCK EDGING (TAYLOR)
Constructed of quality marine grade resins with a double molding process. Profile has heavier wall sections to provide greater protection.
Height: 1.12
Width: 3.25
Length: 120
Weight: 10
SUR-MARK™ MARKER BUOY (TAYLOR)
Exclusive high performance design, stability, high visibility and 3 year limited warranty. Self-righting, internal ballast allows buoy to right itself without requiring additional external ballast. Marks swim areas, no wake zones, hazards, other dangers. Large ring is 18″, which will be fully submerged. Label not included.
Height: 50
Width: 18.5
Length: 18.5
Weight: 38
TUFF END™ INFLATABLE VINYL FENDER (TAYLOR)
Solid vinyl ends for extra strength. Dual purpose bivalve construction. Inflate with hand pump and football-type pin or simply remove screw-in tri-valve and use foot pump or similar high pressure device. Removal also allows rapid deflation. Recommended inflation is 2 PSI. High performance and looks great.
Height: 6
Width: 6
Length: 25
Weight: 2.87
HARD SKIN SUR-MOOR™ MOORING BUOY (TAYLOR)
Puncture proof and almost indestructible buoys features hot-dipped galvanized steel mounting hardware. Blue reflective stripe for nighttime visibility. Sandblasted finish. 3-Year flotation warranty on all Taylor hard skin buoys.
Height: 13
Width: 12.25
Length: 12.25
Weight: 5.8
DECORATIVE RING BUOY (TAYLOR)
Rings are constructed from waterproof nonabsorbent closed-cell foam. Comes equipped with sewn-in polypropylene grab lines and decorative blue bands. Not USCG approved.
Decorative Use Only. Not a life saving device.
Height: 2.75
Width: 20
Length: 20
Weight: 5
COMMANDER II 4.0 GAS RISE PEDESTAL (GARELICK)
With oversized anodized aluminum tubing, solid stainless steel slide rails, and delrin bearing rods the hand built Commander system makes a statement of class aboard any large boat or yacht. 360 degree free rotation or positive lock in 45 degree increments – single lever operation with drag adjustment for optimal performance. 6″ of fore and aft travel with positive locking at 1″ increments. Solid 1″ stainless steel slide rails with lubrication system are operated with a single lever for effortless and smooth precision operation. The 12″ diameter base provides a solid, wobble free mount. Provides 112 lbs. of lift force.
Height: 25.190001
Width: 17.190001
Length: 15.38
Weight: 44
HULL GARD® INFLATABLE VINYL FENDER (TAYLOR)
Oval-shaped design minimizes rolling motion and reduces hull rub. Molded-in eyelets withstand the constant pull and tug of everyday usage. Molded-in inflation valves allow you to customize the pressure for maximum effectiveness. Extra soft, tough and shiny. Valve seats are integrally molded into the fender, not glued in.
Height: 8.5
Width: 8.5
Length: 27
Weight: 5.25
DOCK PRO™ DOCK CART (TAYLOR)
Curved handle design reduces bending-over, making the Dock Pro dock cart easier to handle than conventional carts, while the unique angled tub feature provides better leg clearance for maneuvering. The Dock Pro dock cart is simply the easiest way to carry all your gear from the car to the boat. Features a spacious 7 cu. ft. heavy wall roto-molded poly-tub that will not rust or rot. Zinc coated corrosion resistant hardware used throughout. Plastic rim 20″ pneumatic wheels with roller bearings will stand up to the harshest marine environment.
Height: 14.5
Width: 27
Length: 49
Weight: 35
OUTBOARD STORAGE RACK (BROWNELL BOAT STANDS)
Versatile, safe storage for Outboard Motors
Heavy duty – 2,000 lb. capacity
Mounting Bar dimensions: 48″L x 6″H x 2″D
5″ locking swivel casters
Proudly made in the USA with American Steel
- Versatile, safe storage for Outboard Motors
- Heavy duty – 2,000 lb. capacity
- Mounting Bar dimensions: 48″L x 6″H x 2″D
- 5″ locking swivel casters
- Proudly made in the USA with American Steel
Height: 12
Width: 40
Length: 48
Weight: 155
ELECTRIC WINCH PARTS AND ACCESSORIES (POWERWINCH)
On/Off Switch For Winches
Height: 8
Width: 4.5
Length: 10.25
Weight: 2
HEAVY DUTY STEEL BOAT DOLLY (BROWNELL BOAT STANDS)
Low profile: 2.5″ ground clearance
Adjustable height 15.5″ – 21.5″
Adjustable width 35.5″ – 43.5″
6″ x 2″ phenolic wheels with brakes and casters
Sold individually, one pair accommodates boats to 8,000 lbs
- Low profile: 2.5″ ground clearance
- Adjustable height 15.5″ – 21.5″
- Adjustable width 35.5″ – 43.5″
- 6″ x 2″ phenolic wheels with brakes and casters
- One pair accommodates boats to 8,000 lbs
Sold individually
Height: 12
Width: 40
Length: 33
Weight: 115
OFFSHORE PRO SERIES™ MARINE COOLER (COLEMAN)
- Antimicrobial additive helps resist the growth of odor, mold and mildew
- Comfort grip over molded handles
- Stainless steel cable lid strap
- Tray cutting board also works as divider
- Rust proof stainless steel screws and hinges
3000003701: 4 day ice retention. Rust proof leak resistant drain.
- UV inhibitors added to white cooler
- Antimicrobial liner resists odor, mildew and fungus
- Stainless steel screws and hinges
- Stainless steel cable lid strap to prevent hinge over-extension
- 1 tray and 1 divider
- Integrated fish ruler & cup holders molded into the lid
- No-crush comfort over-molded handles
- Hale?s Navy color accents on liner and handles
- Keeps the Ice!™ up to 6 days
- 3000003701 36 Qt. cooler keeps cold for up to 5 days
Height: 27.5
Width: 14.75
Length: 15.25
Weight: 12.4
FENDER LOC FENDER LINE (TAYLOR)
Provides an adjustable and secure tie-off for your boat fender. Built-in loop eliminates knot tying and works on all types of fenders.
Height: 0.5
Width: 10
Length: 8
Weight: 1
HULL GARD® INFLATABLE VINYL FENDER (TAYLOR)
Oval-shaped design minimizes rolling motion and reduces hull rub. Molded-in eyelets withstand the constant pull and tug of everyday usage. Molded-in inflation valves allow you to customize the pressure for maximum effectiveness. Extra soft, tough and shiny. Valve seats are integrally molded into the fender, not glued in.
Height: 8.5
Width: 8.5
Length: 27
Weight: 5.25
GALVANIZED BOAT STANDS WITH TOP (BROWNELL BOAT STANDS)
Nestable and the most modern, inexpensive, safe method of shoring up boats. They are easily adjusted. Hot dipped galvanized finished. All bases are totally hot dip galvanized to ensure full coverage inside and out.
Height: 20
Width: 25
Length: 25
Weight: 16
TUFF END™ INFLATABLE VINYL BUOY (TAYLOR)
Tuff End fender ends are made from injection molded vinyl tested to 2000 psi tensile strength. Features
large line holes that will accept standard shackles. The curved design hole prevents chafing.
Height: 9
Width: 9
Length: 13
Weight: 2.38
BOAT STAND TOPS ONLY (BROWNELL BOAT STANDS)
Boat Stand Top Only, Orange Keel Style 13″ High
Height: 6
Width: 6
Length: 13
Weight: 11
BOAT COVER SUPPORT SYSTEM (TAYLOR)
Helps extend the life of your boat cover by preventing water from pocketing. Includes 50 feet of webbing, quick release buckles, a boat cover support pole that snaps to the webbing, and two hooks to attach to the transom.
Height: 1.75
Width: 5.25
Length: 29
Weight: 1.945
THE SPOILER™ INFLATABLE LOW DRAG BUOYS (TAYLOR)
Everything about The Spoiler is carefully designed to give fishing operations optimal buoy performance over the long haul.
The Spoiler’s unique, more rounded shape produces greater buoyancy and lower drag when compared with other well known makes. Ribbed design also helps keep drag to an absolute minimum. Independent testing shows that The Spoiler has on average 82% less drag than conventional round buoys. Stable color formulation protects against sun and ensures buoy will never fade to white.
Height: 10.5
Width: 18
Length: 10.5
Weight: 3.33
COASTAL XTREME® SERIES 120 QT. MARINE COOLER
- Holds 190 cans-nearly eight cases of soda
- Xtreme® 5 Technology keeps ice up to 5 days in temperatures up to 90°
- Antimicrobial additive helps resist the growth of odor-causing bacteria on or in the cooler
- UV inhibitor helps prevents yellowing
- Two-way side handles and large tow handle for comfortable pulling
- All-terrain wheels for easier moving
- Tray and cutting board included for convenient food preparation
- Rustproof, leak-resistant channel for no-tilt draining
Height: 18.870001
Width: 19.25
Length: 37.060001
Weight: 25
ANCHORSHADE III (TAYLOR)
This uniquely designed 6′ x 6′ square, UV treated nylon umbrella can be used on almost any vessel from a small fishing boat to larger high performance boats. It is designed to be used when anchored or at idle speed on a calm day. AnchorShade® III offers improved design features such as stronger, larger diameter solid fiberglass structural ribs and hinge connectors. The aluminum frame is powder coated and has a 4 point locking height up to 8 feet. Adjustable straps and rubber non-skid floor end make installation flexible andf easy with no mounts or bases. Includes a heavy duty carrying case w/shoulder strap.
Height: 4.5
Width: 4.5
Length: 67
Weight: 13.5
STORM GARD FENDERS (TAYLOR)
Our team of engineers has spent countless hours creating our patented True Color pearlescent-infused Storm Gard fenders. Pearlescent color mixes match the most popular colors used in today’s gelcoats and trim. Our patented color enhancement process provides deeper richer colors. Integrated color agents add luster in the sunlight. The ultimate finishing touch for your boat. Made in the USA. Lifetime Guarantee.
Height: 6
Width: 6
Length: 23
Weight: 2.2
DOCK PRO™ COMMERCIAL GRADE DOUBLE MOLDED DOCK EDGING (TAYLOR)
Constructed of quality marine grade resins with a double molding process. Profile has heavier wall sections to provide greater protection.
Height: 3.5
Width: 15
Length: 15
Weight: 10
TUFF END™ INFLATABLE VINYL BUOY (TAYLOR)
Tuff End fender ends are made from injection molded vinyl tested to 2000 psi tensile strength.
Features: large line holes that will accept standard shackles. The curved design hole prevents chafing.
Height: 18
Width: 18
Length: 24
Weight: 6.88
KEEL STAND WITH TOP (BROWNELL BOAT STANDS)
Use Brownell Keel Stands in place of conventional wood blocks. Use one keel stand for each 20,000 pounds of vessel weight, spaced evenly along the keel. Always use a minimum of two keel stands. Boats should be stored on a flat, even surface. On softer surfaces, a wash plate is recommended under the base of each keel stand. Use Brownell Boat Stands to stabilize the vessel. Stackable for efficient storage Made in the U.S.A. with domestic steel.
Height: 24
Width: 20
Length: 21
Weight: 36
MOTOR BOAT STAND WITH TOP (BROWNELL BOAT STANDS)
Stackable and the most modern, inexpensive, safe method of shoring up boats. They are easily adjusted. Have angled iron tread plates to prevent damage to pavement. Full length center pipe on all sizes for stability and thread protection. All bases are totally submerged in paint to ensure full coverage inside and out.
Height: 21
Width: 20
Length: 20
Weight: 19
HULL GARD® INFLATABLE VINYL FENDER (TAYLOR)
Oval-shaped design minimizes rolling motion and reduces hull rub. Molded-in eyelets withstand the constant pull and tug of everyday usage. Molded-in inflation valves allow you to customize the pressure for maximum effectiveness. Extra soft, tough and shiny. Valve seats are integrally molded into the fender, not glued in.
Height: 5.5
Width: 5.5
Length: 20
Weight: 2
TUFF END™ INFLATABLE VINYL FENDER (TAYLOR)
Solid vinyl ends for extra strength. Dual purpose bivalve construction. Inflate with hand pump and football-type pin or simply remove screw-in tri-valve and use foot pump or similar high pressure device. Removal also allows rapid deflation. Recommended inflation is 2 PSI. High performance and looks great.
Height: 32
Width: 32
Length: 77
Weight: 67.199997
BIG B™ INFLATABLE VINYL FENDER (TAYLOR)
These fenders feature a tubular center for end-to-end line passage. Ribbed sides keep fenders in position and minimize roll. Built-in bi-valve allows you to inflate the fender to just the right pressure. Can be hung vertically or horizontally. Recommended inflation is 2 PSI. Extra soft, tough and shiny.
Height: 10
Width: 10
Length: 26
Weight: 10
SULLY STICK™ WINTER STICK (TAYLOR)
Sully Stick™ winter stick – A long tapered buoy used in place of a standard round mooring buoy during the winter months. The Sully Stick has a molded in eyelet at the top for easy retrieval. The base eyelet is reinforced with a galvanized metal bushing to attach a rope and connect to the anchor chain. The shape of the Sully stick helps it escape ice entrapment better than a round buoy and can extend the useful life of a mooring buoy by protecting it from the damaging effects of freezing temperatures.
Height: 34.369999
Width: 5.87
Length: 5.87
Weight: 3.5
TUFF END™ INFLATABLE VINYL BUOY (TAYLOR)
Tuff End fender ends are made from injection molded vinyl tested to 2000 psi tensile strength.
Features: large line holes that will accept standard shackles. The curved design hole prevents chafing.
Height: 9
Width: 9
Length: 13
Weight: 2.38
SUR-MOOR™ T3C™ BUOY (TAYLOR)
Hard skin mooring buoys have a seamless and tough, one-piece polyethylene shell. Hard skin shells feature ultraviolet light absorbers for long-term life under the sun. Filled with EPS foam to positively displace water. Tube-through-the-center design. Three-Year Flotation warranty. Textured finish to enhance paint adhesion.
- The “ET” models have:
- Extended tube is 2.5″ high off the top of the ball
- Extended tube is reinforced with secondary schedule 40 (double thickness) and rolled over for extra strength
- Tube is drilled with a 21/64″ hole 3/4″ down from top to easily secure chain if desired
Height: 18.25
Width: 18.25
Length: 18.25
Weight: 11.64
NOVELTY DESIGN FLAG (TAYLOR)
Perma-print nylon.
Height: 1.25
Width: 5
Length: 8
Weight: 0.92
FIXED HEIGHT SEAT BASE & SPIDER – SMOOTH SERIES (GARELICK)
2-7/8″ diameter stanchion tube, 9-1/4″ diameter base plate. Mounts any seat securely. 4 prong spider swivels 360° and locks positively. Aluminum.
Height: 30.5
Width: 9.38
Length: 9.38
Weight: 8.75
STORM GARD FENDERS (TAYLOR)
Our team of engineers has spent countless hours creating our patented True Color pearlescent-infused Storm Gard fenders. Pearlescent color mixes match the most popular colors used in today’s gelcoats and trim. Our patented color enhancement process provides deeper richer colors. Integrated color agents add luster in the sunlight. The ultimate finishing touch for your boat. Made in the USA. Lifetime Guarantee.
Height: 6
Width: 6
Length: 23
Weight: 2.2
OUTDOOR SOFT COOLERS (COLEMAN)
Soft coolers that won’t collapse under pressure
- Removable hard liner to use with or without ice
- Heat-welded seams prevent leaks
- Front zippered pocket
Height: 8.5
Width: 7.08
Length: 10.23
Weight: 1.091
BOAT RACKS (BROWNELL BOAT STANDS)
Brownell’s Boat Racks can be used with fork lifts, hydraulic trailers or any hoist. Utilizes space efficiently. The simple design is well-suited for storage and use in dealer showrooms and boat shows. For craft up to 15,000 lbs. Ideal for wash downs and service at dry-stack facilities. Conveniently compact, racks are easy to store when not in use.
The Boat Rack system is comprised of a bow and a stern unit. The stern unit is offered in two widths, to accommodate virtually any hull shape. Made in the USA. Constructed from steel. When used with Brownell’s Boat Stands, the racks offer unmatched stability.
Height: 16
Width: 24
Length: 22
Weight: 50
AER-O-BUOY RING BUOY (TAYLOR)
CCG Approved
Tough polyethylene outer shell resists gas, oil and saltwater. Closed cell foam core for buoyancy. Grab line threading system allows for easy replacement.
Height: 3.5
Width: 24
Length: 24
Weight: 5.75
Hybrid construction means soft compressible foam where you want it and tough high density foam where you need it. The inner core of the new foam bumper is a lower density EVA foam (2.8 pounds per cubic foot) and the outer (front and back) pieces are tougher, higher density PE foam (8.7 pcf). UV protected foam material is maintenance free, non-marring and provides superior cushioning from impact. Designed for both horizontal and vertical applications, dock cushions are pre-drilled and ready to mount. Hardware not included.
Height: 4
Width: 38
Length: 6
Weight: 3.25
ACCESS DOOR (SHRINKWRAP)
Features zipper closure.
Height: 3
Width: 18
Length: 30
Weight: 1.5
HULL GARD® INFLATABLE VINYL FENDER (TAYLOR)
Oval-shaped design minimizes rolling motion and reduces hull rub. Molded-in eyelets withstand the constant pull and tug of everyday usage. Molded-in inflation valves allow you to customize the pressure for maximum effectiveness. Extra soft, tough and shiny. Valve seats are integrally molded into the fender, not glued in.
Height: 8.5
Width: 8.5
Length: 27
Weight: 5.25
DOCK PRO™ VINYL DOCK BUMPERS (TAYLOR)
Protects the side and the top of the dock with a 1-1/4″ cushion above dock level. Made from the same tough marine grade vinyl as the TAYLOR fenders. Superior cushioning protects boats and docks from each other.
Height: 4.25
Width: 10.5
Length: 10.5
Weight: 1.828
TROLLING MOTOR PROP PROTECTOR (TAYLOR)
Extend the life of your boat cover by protecting it from wear and tear caused by sharp edges on your trolling motor prop. Made from heavy duty marine-grade vinyl. Protect your cover from prop blade wear.
Height: 1
Width: 10.2
Length: 10.2
Weight: 0.95
FEMALE WINCH SOCKET (POWERWINCH)
Female Winch Socket
Height: 8
Width: 4.5
Length: 10.25
Weight: 1
BOAT STAND TOPS ONLY (BROWNELL BOAT STANDS)
Boat Stand V-Top Only, Orange Keel Style 16″ High
Height: 21
Width: 4
Length: 8
Weight: 18
MAST BUOY (TAYLOR)
Ideal for pick-up or diving applications, the 5/16″ fiberglass mast is coated with a PVC outer layer for strength, flexibility, and elimination of fiberglass shards. The urethane foam filled HDPE outer shell provides great flotation and years of service. The cast weight is also covered with HDPE so it will not scratch or mar your boat’s finish.
Height: 8
Width: 17
Length: 100.75
Weight: 3.833
PERSONAL WATERCRAFT BUOY (TAYLOR)
Can be used to mark hazards, fishing spots, race course or as fenders. 8″ round. Made of same quality vinyl used in Taylor’s HullGard fenders.
Height: 10
Width: 8
Length: 8
Weight: 1.366
STEP-SAFE™ DOCK STEP (TAYLOR)
Molded in durable UV resistant polyethylene with non-slip pad on top of each step. 1-1/2″ wide flange provides adequate mounting surface for docks. Hand rails are available for two and three step models, sold separately.
Height: 12
Width: 18.5
Length: 22.25
Weight: 11.55
COLLAPSIBLE 40 CAN COOLER (COLEMAN)
- Heat-welded seams prevent leaks
- Collapses down for storage when not in use
- Side front and top dry storage
Height: 17.719999
Width: 11.81
Length: 15.75
Weight: 2.172
OFFSHORE PRO SERIES™ MARINE COOLER (COLEMAN)
- Antimicrobial additive helps resist the growth of odor, mold and mildew
- Comfort grip over molded handles
- Stainless steel cable lid strap
- Tray cutting board also works as divider
- Rust proof stainless steel screws and hinges
3000003695/3694: 6 day ice retention. Rust proof leak resistant threaded channel drain with drain valve.
- UV inhibitors added to white cooler
- Antimicrobial liner resists odor, mildew and fungus
- Stainless steel screws and hinges
- Stainless steel cable lid strap to prevent hinge over-extension
- 1 tray and 1 divider
- Integrated fish ruler & cup holders molded into the lid
- No-crush comfort over-molded handles
- Hale?s Navy color accents on liner and handles
- Keeps the Ice!™ up to 6 days
- 3000003701 36 Qt. cooler keeps cold for up to 5 days
Height: 36.700001
Width: 17
Length: 17.799999
Weight: 21.4
EMERGENCY RESPONSE SPILL KIT (TAYLOR)
Manufactured from the highest quality UV-resistant polyethylene resin and is 100% maintenance-free. The double-walled lid is secured with a stainless latch, creating a weather-proof design to ensure the contents remain protected and dry.
Height: 24
Width: 26
Length: 44
Weight: 33
URBAN SOFT COOLERS (COLEMAN)
Soft coolers that won’t collapse under pressure
- Removable hard liner to use with or without ice
- Heat-Welded seams prevent leaks
- Front zippered pocket
Height: 19.879999
Width: 11.14
Length: 12.51
Weight: 2.637
Taylor Anchor/Mooring Parts & Accessories
Plastic rim solid wheels with roller bearings will stand up to the harshest marine environment.
Height: 19
Width: 2.25
Length: 19
Weight: 2
EMERGENCY RESPONSE SPILL KIT (TAYLOR)
Protect your business from fines, hefty cleanup costs and damages when oil, diesel or gasoline is spilled in your marina. manufactured from the highest quality UV-resistant polyethylene resin and is 100% maintenance-free. The double-walled lid is secured with a stainless latch, creating a weather-proof design to ensure the contents remain protected and dry.
Contains:
1 – PE Dock Storage Box
1 – Pair of Nitrile Gloves
1 – PE Storage Box
4 – Oil Absorbent Pillows, 18″x18″
10 – Disposal Bags – Yellow
15 – Oil Absorbent Socks, 3″x4′
100 – Oil Absorbent Pads, 16″x20″
Height: 24
Width: 26
Length: 44
Weight: 33
MOTOR BOAT STAND WITH TOP (BROWNELL BOAT STANDS)
Stackable and the most modern, inexpensive, safe method of shoring up boats. They are easily adjusted. Have angled iron tread plates to prevent damage to pavement. Full length center pipe on all sizes for stability and thread protection. All bases are totally submerged in paint to ensure full coverage inside and out.
Height: 14
Width: 12
Length: 12
Weight: 9
STAINLESS STEEL FENDER RACK (TAYLOR)
A convenient place to stow fenders. Mounts on any rail and stanchion system. Movable J hooks accommodates 7/8″ rail and stanchion system, Tightens to blend with any angle. Cross-reinforced for extra strength. Holds any style fender.Holds “Big B” and “Hull Gard” fenders effectively. Folds flat for easy storage.
Height: 3
Width: 17
Length: 57
Weight: 3.2
OUTDOOR SOFT COOLERS (COLEMAN)
Soft coolers that won’t collapse under pressure
- Removable hard liner to use with or without ice
- Heat-welded seams prevent leaks
- Front zippered pocket
Height: 12.4
Width: 7.87
Length: 11.81
Weight: 1.312
TUFF END™ INFLATABLE VINYL BUOY (TAYLOR)
Tuff End fender ends are made from injection molded vinyl tested to 2000 psi tensile strength.
Features: large line holes that will accept standard shackles. The curved design hole prevents chafing.
Height: 21
Width: 21
Length: 29
Weight: 11.373
EMERGENCY RESPONSE SPILL KIT (TAYLOR)
Protect your business from fines, hefty cleanup costs and damages when oil, diesel or gasoline is spilled in your marina. manufactured from the highest quality UV-resistant polyethylene resin and is 100% maintenance-free. The double-walled lid is secured with a stainless latch, creating a weather-proof design to ensure the contents remain protected and dry.
Contains:
1 – PE Dock Storage Box
1 – Pair of Nitrile Gloves
1 – PE Storage Box
4 – 5″ x 10′ Oil Absorbent Booms
10 – Disposal Bags – Yellow
100 – 16″ x 20″ Oil Absorbent Pads
Height: 24
Width: 26
Length: 44
Weight: 33
CAPSTAN 300 WINDLASS (POWERWINCH)
Retrieval speed up to 85’/minute. Housing is durable aluminum with triple finish nylon coating. Exclusive stainless steel rope and chain guidance system and a stainless steel drive shaft stands up to years of use. Built with durable stainless steel fasteners that resist corrosion for easy removal. Handles 3 strand nylon rope up to 5/8″.
Features:
? One piece motor plate for smooth power transmission & improved gear life
? Heat treated, oil impregnated gear system for smoother operation
? Watertight seals for additional protection against corrosion
? Helm operated one touch control
? Replaceable rode glide smoothly channels rope & chain below deck
Features:
- One piece motor plate for smooth power transmission & improved gear life
- Heat treated, oil impregnated gear system for smoother operation
- Watertight seals for additional protection against corrosion
- Helm operated one touch control
- Replaceable rode glide smoothly channels rope & chain below deck
Height: 10.31
Width: 8.06
Length: 14.25
Weight: 19
OFFSHORE PRO SERIES™ MARINE COOLER (COLEMAN)
- Insulation retains ice for six days in temperatures up to 90° F
- Antimicrobial additive helps resist the growth of odor, mold and mildew
- Built in UV inhibitor helps prevents yellowing
- Comfort grip over molded handles
- Stainless steel spring lid straps
- Tray cutting board also works as divider
- Rust proof stainless steel screws and hinges
- Rust proof leak resistant threaded channel drain with drain valve
- UV inhibitors added to white cooler
- Antimicrobial liner resists odor, mildew and fungus
- Stainless steel screws and hinges
- Stainless steel cable lid strap to prevent hinge over-extension
- 1 tray and 1 divider
- Integrated fish ruler & cup holders molded into the lid
- No-crush comfort over-molded handles
- Hale?s Navy color accents on liner and handles
- Keeps the Ice!™ up to 6 days
- 3000003701 36 Qt. cooler keeps cold for up to 5 days
Height: 31
Width: 15.75
Length: 18.25
Weight: 16.799999
DOCK PRO™ COMMERCIAL GRADE DOUBLE MOLDED DOCK EDGING (TAYLOR)
Constructed of quality marine grade resins with a double molding process. Profile has heavier wall sections to provide greater protection.
Height: 3.75
Width: 2.75
Length: 120
Weight: 11.7
MOORING SNUBBER (TAYLOR)
Mooring snubbers prevent mooring line breakage along with compensating for sudden jolting and excess stretching of lines beyond parting strength. Made from super elastic isoprene natural rubber snubbers also provide maximum protection against the stress caused by wind, waves, and wakes. No tools needed to install. Locks lines safely and securely. Self-locking internal system eliminates chafing.
Height: 2
Width: 5.5
Length: 24
Weight: 1.6
HULL GARD® INFLATABLE VINYL FENDER (TAYLOR)
Oval-shaped design minimizes rolling motion and reduces hull rub. Molded-in eyelets withstand the constant pull and tug of everyday usage. Molded-in inflation valves allow you to customize the pressure for maximum effectiveness. Extra soft, tough and shiny. Valve seats are integrally molded into the fender, not glued in.
Height: 10.5
Width: 10.5
Length: 30
Weight: 9
BIMINI SUPPORT POLES (TAYLOR)
Keep your bimini top off the gunwales with a pair of bimini support poles. These poles replace your rear straps and keep your top “up and out of the way.” Two jaw slides (7/8″) and deck hinge are included. 1 Pair per card.
Note:These poles should never be used to replace the front support straps. Only the rear straps should be replaced with adjustable support poles. Do not exceed 35 miles per hour while using Bimini top support poles.
Height: 2.25
Width: 4.5
Length: 40.5
Weight: 2.5
OIL-FREE D-ICER™ (TAYLOR)
- Oil free design with no chance of oil leaks
- Polluting our environment
- More energy efficient than oil filled units and costs less to operate
- Molded glass filled nylon shroud guides water flow and blocks debris
- Stainless steel motor shaft and motor housing eliminates corrosion
- High efficiency motor and high performance propeller
- Standard 50′ field replaceable power cord
- Oil free design with no chance of oil leaks polluting our environment
- More energy efficient than oil filled units and costs less to operate
- Molded glass filled nylon shroud guides water flow and blocks debris
- Stainless steel motor shaft and motor housing eliminates corrosion
- High efficiency motor and high performance propeller
- Standard 50′ field replaceable power cord
Height: 14.5
Width: 14.5
Length: 15.5
Weight: 37
CIRCUIT BREAKER (POWERWINCH)
30 amp. For 412, 602, 603
40 amp. For models 712
60 amp. For models 77712, 812, 77912, 77192, 77114, SH-12HB
Height: 8
Width: 8
Length: 10.25
Weight: 1
SPORT/DIVER/BASSBOAT LADDER MOUNTING HARDWARE (GARELICK)
Sport/Diver Ladder Transom Extension Shim, 3″
Height: 9.75
Width: 3.88
Length: 4.75
Weight: 1.5
STORM GARD FENDERS (TAYLOR)
Our team of engineers has spent countless hours creating our patented True Color pearlescent-infused Storm Gard fenders. Pearlescent color mixes match the most popular colors used in today’s gelcoats and trim. Our patented color enhancement process provides deeper richer colors. Integrated color agents add luster in the sunlight. The ultimate finishing touch for your boat. Made in the USA. Lifetime Guarantee.
Height: 8
Width: 8
Length: 26
Weight: 4.2
DOCK PRO™ C-SHAPE GARD (TAYLOR)
Double molded vinyl dock edging is molded twice then molecularly bonded for extra durability and protection. A tough inner core is surrounded with our soft white vinyl for extra cushion against tough docks. Each piece installs easily to the edges of dock piers or floats with screws or nails.
Height: 3.5
Width: 1.75
Length: 96
Weight: 5.7
TUFF END™ INFLATABLE VINYL FENDER (TAYLOR)
Tuff End™ fenders are for heavy duty marine applications. Constructed from the same flexible, resilient vinyl as our Super Gard, Big B, and Hull Gard fenders, the end in each Tuff End is injection molded for extra strength and reliability. Tuff Ends are designed to perform under the most demanding conditions. Tuff End™ fenders feature seamless construction, the strongest in the industry!
Height: 24
Width: 24
Length: 57
Weight: 29.200001
OIL-FREE D-ICER™ (TAYLOR)
- Oil free design with no chance of oil leaks
- Polluting our environment
- More energy efficient than oil filled units and costs less to operate
- Molded glass filled nylon shroud guides water flow and blocks debris
- Stainless steel motor shaft and motor housing eliminates corrosion
- High efficiency motor and high performance propeller
- Standard 50′ field replaceable power cord
- Oil free design with no chance of oil leaks polluting our environment
- More energy efficient than oil filled units and costs less to operate
- Molded glass filled nylon shroud guides water flow and blocks debris
- Stainless steel motor shaft and motor housing eliminates corrosion
- High efficiency motor and high performance propeller
- Standard 50′ field replaceable power cord
Height: 14.5
Width: 14.5
Length: 15.5
Weight: 37
TUFF END™ INFLATABLE VINYL FENDER (TAYLOR)
Solid vinyl ends for extra strength. Dual purpose bivalve construction. Inflate with hand pump and football-type pin or simply remove screw-in tri-valve and use foot pump or similar high pressure device. Removal also allows rapid deflation. Recommended inflation is 2 PSI. High performance and looks great.
Height: 15
Width: 15
Length: 41
Weight: 15.1
HARD SKIN SUR-MOOR™ MOORING BUOY (TAYLOR)
Puncture proof and almost indestructible buoys features hot-dipped galvanized steel mounting hardware. Blue reflective stripe for nighttime visibility. Sandblasted finish. 3-Year flotation warranty on all Taylor hard skin buoys.
Height: 24.120001
Width: 24
Length: 24
Weight: 20.25
BIG B™ INFLATABLE VINYL FENDER (TAYLOR)
These fenders feature a tubular center for end-to-end line passage. Ribbed sides keep fenders in position and minimize roll. Built-in bi-valve allows you to inflate the fender to just the right pressure. Can be hung vertically or horizontally. Recommended inflation is 2 PSI. Extra soft, tough and shiny.
Height: 8
Width: 8
Length: 20
Weight: 3
DOCK FLOAT (TAYLOR)
Has seamless area and UV resistant black polyethylene shell filled with EPS foam. Outer shell resists impacts and protects foam center from saltwater, gasoline and most chemicals. Thick mounting flange can be drilled to accommodate attachment fasteners for easy mounting to any dock design. 8 year floatation warranty.
Height: 16
Width: 24
Length: 48
Weight: 41
DOCK FLOAT (TAYLOR)
Has seamless area and UV resistant black polyethylene shell filled with EPS foam. Outer shell resists impacts and protects foam center from saltwater, gasoline and most chemicals. Thick mounting flange can be drilled to accommodate attachment fasteners for easy mounting to any dock design. 8 year floatation warranty.
Height: 12
Width: 24
Length: 36
Weight: 20
DOCK PRO™ INFLATABLE VINYL DOCK WHEEL (TAYLOR)
Rolls with impact to fend off boat. Same soft vinyl as in Taylor fenders. Extra heavy galvanized base with predrilled holes. 12″ and 18″ Wheels use large 2″ dia. axle housing for maximum strength. 3 year warranty.
Height: 16
Width: 16
Length: 16
Weight: 16.5
BIG B™ INFLATABLE VINYL FENDER (TAYLOR)
These fenders feature a tubular center for end-to-end line passage. Ribbed sides keep fenders in position and minimize roll. Built-in bi-valve allows you to inflate the fender to just the right pressure. Can be hung vertically or horizontally. Recommended inflation is 2 PSI. Extra soft, tough and shiny.
Height: 10
Width: 10
Length: 26
Weight: 7.7
STEP-SAFE™ DOCK STEP (TAYLOR)
Molded in durable UV resistant polyethylene with non-slip pad on top of each step. 1-1/2″ wide flange provides adequate mounting surface for docks. Hand rails are available for two and three step models, sold separately.
Height: 25.5
Width: 24.5
Length: 35
Weight: 27
PWC FENDER (TAYLOR)
Designed to custom fit the profile of most PWCs. The fender bottom is shaped to “hook” under the bond flange for quick attachment. Flex areas on the fender provide a “hinge” action that allows the fender to conform to the shape of the watercraft. Features an inflation valve for air pressure adjustment and includes a suction cup and securing line.
Height: 9
Width: 3.5
Length: 9
Weight: 1.833
BIG B™ INFLATABLE VINYL FENDER (TAYLOR)
These fenders feature a tubular center for end-to-end line passage. Ribbed sides keep fenders in position and minimize roll. Built-in bi-valve allows you to inflate the fender to just the right pressure. Can be hung vertically or horizontally. Recommended inflation is 2 PSI. Extra soft, tough and shiny.
Height: 6
Width: 6
Length: 15
Weight: 2.5
SPORT/DIVER/BASSBOAT LADDER MOUNTING HARDWARE (GARELICK)
Under Platform Mount
Height: 9.75
Width: 3.88
Length: 4.75
Weight: 2.5
MOORING SNUBBER (TAYLOR)
Mooring snubbers prevent mooring line breakage along with compensating for sudden jolting and excess stretching of lines beyond parting strength. Made from super elastic isoprene natural rubber snubbers also provide maximum protection against the stress caused by wind, waves, and wakes. No tools needed to install. Locks lines safely and securely. Self-locking internal system eliminates chafing.
Height: 3
Width: 5.5
Length: 24
Weight: 2.7
LED FLASHLIGHT CT-70F (COLEMAN)
- Tactical look and feel with crenulated bezel
- Electronic dimming, focusing bezel
- 3 modes: High. Low & Strobe
- Powered by 6AA Batteries
- Tactical look and feel with crenulated bezel
- Electronic dimming, focusing bezel
- 3 modes: High. Low & Strobe
Height: 12
Width: 2.37
Length: 5
Weight: 2.85
DOCK PRO™ COMMERCIAL GRADE DOUBLE MOLDED DOCK EDGING (TAYLOR)
Constructed of quality marine grade resins with a double molding process. Profile has heavier wall sections to provide greater protection.
Height: 2.75
Width: 2
Length: 120
Weight: 8.7
GALVANIZED BOAT STANDS WITH TOP (BROWNELL BOAT STANDS)
Nestable and the most modern, inexpensive, safe method of shoring up boats. They are easily adjusted. Hot dipped galvanized finished. All bases are totally hot dip galvanized to ensure full coverage inside and out.
Height: 25
Width: 20
Length: 20
Weight: 20
ELECTRIC TRAILER WINCH (POWERWINCH)
Remote power-in/freewheel-out operation. With positive lock when not winding. Easily operated with Tri-Matic Roll-n-Gage control. Efficient gear train system for smoother pulling action and less amperage draw. Level wind system prevents snarls and cable wear. Aircraft quality cable fitted with safety hook and super-tub ABS weather resistant housing. Comes with simple to install wiring harness with 80A circuit breaker. Hooks to any 12 volt auto or truck battery in minutes. Includes quick mount kit and remote control on-off lanyard. Includes hand crank, owner’s manual, and a 50′ cable fitted with safety hook. Models include pulley block for double line operation. 10″ deep, 10″ wide and 8″ high. 2 Year warranty.
Height: 10.31
Width: 8.06
Length: 14.25
Weight: 35
HULL GARD® INFLATABLE VINYL FENDER (TAYLOR)
Oval-shaped design minimizes rolling motion and reduces hull rub. Molded-in eyelets withstand the constant pull and tug of everyday usage. Molded-in inflation valves allow you to customize the pressure for maximum effectiveness. Extra soft, tough and shiny. Valve seats are integrally molded into the fender, not glued in.
Height: 5.5
Width: 5.5
Length: 20
Weight: 2
DOCK PRO™ PREMIUM SIDE GARD (TAYLOR)
Heavy duty double molded vinyl profile. Gives extra durability and protection dockside. Installs easily with screws or nails.
Height: 2.25
Width: 4.5
Length: 120
Weight: 13.7
BUOY HARDWARE (TAYLOR)
1/2″ diameter hot-dipped galvanized rod with 4″ long swivel, 2 galvanized washers and nylon care lock nut.
Height: 0.5
Width: 3.5
Length: 24
Weight: 3
DOCK PRO™ VINYL DOCK BUMPERS (TAYLOR)
Protects the side and the top of the dock with a 1-1/4″ cushion above dock level. Made from the same tough marine grade vinyl as the TAYLOR fenders. Superior cushioning protects boats and docks from each other.
Height: 2.5
Width: 10
Length: 10
Weight: 1.866
SWIVEL SPIDER SEAT MOUNT – MILLENNIUM SERIES (GARELICK)
Smooth Series
Low profile design allows 360° of rotation
Anodized aluminum slide plate has standard 5″ x 12″ hole pattern mounting holes
Rotation is regulated by dual locking devices – lift the positive lock lever to rotate
Drop the lever to lock in place in 10° increments
Secondary twist control offers variable drag adjustment and can be tightened down to lock in place
Smooth Series
Height: 5
Width: 7.13
Length: 9
Weight: 4
LIFE RING BUOY (TAYLOR)
Inspected and tested in accordance with U. S. Coast Guard regulations. Rings contain unicellular polyurethane foam for buoyancy. Molded-in becket design means there are no straps to wear, mildew, or deteriorate.
Vinyl coated foam.
Height: 3.5
Width: 20
Length: 20
Weight: 3.666
DOCK PRO™ C-SHAPE GARD (TAYLOR)
Double molded vinyl dock edging is molded twice then molecularly bonded for extra durability and protection. A tough inner core is surrounded with our soft white vinyl for extra cushion against tough docks. Each piece installs easily to the edges of dock piers or floats with screws or nails.
Height: 3.5
Width: 24
Length: 24
Weight: 18
GALVANIZED BOAT STANDS WITH TOP (BROWNELL BOAT STANDS)
Nestable and the most modern, inexpensive, safe method of shoring up boats. They are easily adjusted. Hot dipped galvanized finished. All bases are totally hot dip galvanized to ensure full coverage inside and out.
Height: 14
Width: 12
Length: 12
Weight: 9
STERN DRIVE INSTALLATION JACK (BROWNELL BOAT STANDS)
Adjusts on 3 axes to make stern drive removal and installation an easy one man job. These heavy duty jacks are made in the USA.
Adjusts on 3 axes to make stern drive removal and installation an easy one man job. These heavy duty jacks are made in the USA.
Height: 12
Width: 36
Length: 48
Weight: 175
SD2 STERN DRIVE INSTALLATION JACK (BROWNELL BOAT STANDS)
This safe, reliable, and durable American made jack will stand up to use in a shop or in mobile service. Pneumatic wheels roll easily over all surfaces and the innovative design works in tight quarters. 18″-46″ High, 350 lb. capacity.
Height: 12
Width: 40
Length: 48
Weight: 100
LIFE RING BUOY (TAYLOR)
Inspected and tested in accordance with U. S. Coast Guard regulations. Rings contain unicellular polyurethane foam for buoyancy. Molded-in becket design means there are no straps to wear, mildew, or deteriorate.
Vinyl coated foam.
Height: 3
Width: 24
Length: 24
Weight: 4
DOCK PRO™ COMMERCIAL GRADE DOUBLE MOLDED DOCK EDGING (TAYLOR)
Constructed of quality marine grade resins with a double molding process. Profile has heavier wall sections to provide greater protection.
Height: 0.5
Width: 3.5
Length: 17.5
Weight: 2.12
DOCK PRO™ HEAVY DUTY DOCK BUMPER (TAYLOR)
Heavy duty vinyl dock bumpers are ideal for rough conditions, and can take a beating. Made from UV resistant marine grade vinyl. The straight piece can be mounted horizontally, or the curved back allows for vertical mounting on pilings. Both bumpers have inflation valves for easy adjustment. Pre-drilled for easy, permanent mounting with plated fasteners.
Height: 10.5
Width: 6
Length: 13.5
Weight: 4.4
DOCK PRO™ MEDIUM EDGE GARD (TAYLOR)
Double molded vinyl dock edging is molded twice then molecularly bonded for extra durability and protection. A tough inner core is surrounded with our soft white vinyl for extra cushion against tough docks. Each piece installs easily to the edges of dock piers or floats with screws or nails.
Height: 3.75
Width: 15.5
Length: 15.5
Weight: 7.5
BOATSTAND WOOD BLOCKING (BROWNELL BOAT STANDS)
Made from Pine. Brownell recommends a minimum of two blocking piles placed on hard, stable ground to carry the boat’s weight. Each blocking pile consists of four blocks.
Height: 12
Width: 12
Length: 22
Weight: 53
LOW FREEBOARD FENDER (TAYLOR)
The first boat fender to address the needs of low freeboard boats. Shaped to protect the gunwales and rubrail. Offers superior protection compared to regular fenders against high docks. Low Freeboard fenders can be tied over the cleat to position it higher on the boat, putting protection where its needed. Made from specially formulated tough marine grade vinyl and features an inflation valve for air pressure adjestment.
Height: 5
Width: 5
Length: 15
Weight: 2
BIG B™ INFLATABLE VINYL FENDER (TAYLOR)
These fenders feature a tubular center for end-to-end line passage. Ribbed sides keep fenders in position and minimize roll. Built-in bi-valve allows you to inflate the fender to just the right pressure. Can be hung vertically or horizontally. Recommended inflation is 2 PSI. Extra soft, tough and shiny.
Height: 10
Width: 10
Length: 26
Weight: 10
DOCK PRO™ INFLATABLE VINYL DOCK WHEEL (TAYLOR)
Rolls with impact to fend off boat. Same soft vinyl as in Taylor fenders. Extra heavy galvanized base with predrilled holes. 12″ and 18″ Wheels use large 2″ dia. axle housing for maximum strength. 3 year warranty.
Height: 8
Width: 8
Length: 8
Weight: 4.65
TUFF END™ INFLATABLE VINYL FENDER (TAYLOR)
Solid vinyl ends for extra strength. Dual purpose bivalve construction. Inflate with hand pump and football-type pin or simply remove screw-in tri-valve and use foot pump or similar high pressure device. Removal also allows rapid deflation. Recommended inflation is 2 PSI. High performance and looks great.
Height: 8
Width: 8
Length: 27
Weight: 4.437
ESKY® MARINE COOLERS (COLEMAN)
- Built in tie down points
- Exoskeletion scratch resistant texture on high impact areas
- Heavy-Duty rubber latches
- Integrated large knuckle hinges
- Padlock attachment for lock tight security
- Non-skid feet
- Built in tie down points
- Exoskeletion scratch resistant texture on high impact areas
- Heavy-Duty rubber latches
- Integrated large knuckle hinges
- Padlock attachment for lock tight security
- Non-skid feet
Height: 23.18
Width: 24.559999
Length: 49.5
Weight: 74
STORM GARD FENDERS (TAYLOR)
Our team of engineers has spent countless hours creating our patented True Color pearlescent-infused Storm Gard fenders. Pearlescent color mixes match the most popular colors used in today’s gelcoats and trim. Our patented color enhancement process provides deeper richer colors. Integrated color agents add luster in the sunlight. The ultimate finishing touch for your boat. Made in the USA. Lifetime Guarantee.
Height: 6
Width: 6
Length: 23
Weight: 2.2
THE SPOILER™ INFLATABLE LOW DRAG BUOYS (TAYLOR)
Everything about The Spoiler is carefully designed to give fishing operations optimal buoy performance over the long haul.
The Spoiler’s unique, more rounded shape produces greater buoyancy and lower drag when compared with other well known makes. Ribbed design also helps keep drag to an absolute minimum. Independent testing shows that The Spoiler has on average 82% less drag than conventional round buoys. Stable color formulation protects against sun and ensures buoy will never fade to white.
Height: 10.5
Width: 18
Length: 10.5
Weight: 3.33
THE WAVE (TAYLOR)
Heavy duty PVC. Form a wave or loop shape with this flexible extrusion and nail it down. Comes with mounting nails. 25 ‘ coil covers approximately 18’ of dock space.
Height: 6
Width: 10
Length: 10
Weight: 16.75
BOAT RACKS (BROWNELL BOAT STANDS)
Brownell’s Boat Racks can be used with fork lifts, hydraulic trailers or any hoist. Utilizes space efficiently. The simple design is well-suited for storage and use in dealer showrooms and boat shows. For craft up to 20,000 lbs. Ideal for wash downs and service at dry-stack facilities. Conveniently compact, racks are easy to store when not in use.
The Boat Rack system is comprised of a bow and a stern unit. The stern unit is offered in two widths, to accommodate virtually any hull shape. Made in the USA. Constructed from steel. When used with Brownell’s Boat Stands, the racks offer unmatched stability.
Height: 52
Width: 34
Length: 48
Weight: 128
TUFF END™ INFLATABLE VINYL FENDER (TAYLOR)
Tuff End™ fenders are for heavy duty marine applications. Constructed from the same flexible, resilient vinyl as our Super Gard, Big B, and Hull Gard fenders, the end in each Tuff End is injection molded for extra strength and reliability. Tuff Ends are designed to perform under the most demanding conditions. Tuff End™ fenders feature seamless construction, the strongest in the industry!
Height: 12
Width: 12
Length: 35
Weight: 8.75
ANCHORSHADE III (TAYLOR)
This uniquely designed 6′ x 6′ square, UV treated nylon umbrella can be used on almost any vessel from a small fishing boat to larger high performance boats. It is designed to be used when anchored or at idle speed on a calm day. AnchorShade® III offers improved design features such as stronger, larger diameter solid fiberglass structural ribs and hinge connectors. The aluminum frame is powder coated and has a 4 point locking height up to 8 feet. Adjustable straps and rubber non-skid floor end make installation flexible andf easy with no mounts or bases. Includes a heavy duty carrying case w/shoulder strap.
Height: 4.5
Width: 4.5
Length: 67
Weight: 13.5
STORM GARD FENDERS (TAYLOR)
Our team of engineers has spent countless hours creating our patented True Color pearlescent-infused Storm Gard fenders. Pearlescent color mixes match the most popular colors used in today’s gelcoats and trim. Our patented color enhancement process provides deeper richer colors. Integrated color agents add luster in the sunlight. The ultimate finishing touch for your boat. Made in the USA. Lifetime Guarantee.
Height: 8
Width: 8
Length: 26
Weight: 4.2
ESKY® MARINE COOLERS (COLEMAN)
- Built in tie down points
- Exoskeletion scratch resistant texture on high impact areas
- Heavy-Duty rubber latches
- Integrated large knuckle hinges
- Padlock attachment for lock tight security
- Non-skid feet
- Built in tie down points
- Exoskeletion scratch resistant texture on high impact areas
- Heavy-Duty rubber latches
- Integrated large knuckle hinges
- Padlock attachment for lock tight security
- Non-skid feet
Height: 22.190001
Width: 24.440001
Length: 36.75
Weight: 57
DOCK PRO™ MEDIUM EDGE GARD (TAYLOR)
Double molded vinyl dock edging is molded twice then molecularly bonded for extra durability and protection. A tough inner core is surrounded with our soft white vinyl for extra cushion against tough docks. Each piece installs easily to the edges of dock piers or floats with screws or nails.
Height: 3.5
Width: 15
Length: 15
Weight: 7.7
PONTOON GAZEBO (TAYLOR)
Top accommodates both 96″ and 102″ wide boats and extends out to 8 ft. of coverage. Constructed from Hot Shot™ marine grade polyester fabric, the top is strong yet light weight. It is supported by a shock-corded fiberglass pole framework that breaks down for easy storage. The large interior radius allows you to sit comfortably without bending over and provides excellent head room. Comes complete with shade top, frame, marine grade hardware and storage bag.
Height: 8
Width: 8
Length: 23
Weight: 9.4
TLC BOAT PAD (BROWNELL BOAT STANDS)
Designed to give your boat tender loving care. Can be mounted to any boat stand or adjustable trailer top. TPE surface protects delicate finishes, epoxy, gel coat or fine wooden craft. Provides drainage to eliminate moisture on the hull. fasteners included. Made in USA.
Height: 1
Width: 12
Length: 12
Weight: 2
BOAT RACKS (BROWNELL BOAT STANDS)
Brownell’s Boat Racks can be used with fork lifts, hydraulic trailers or any hoist. Utilizes space efficiently. The simple design is well-suited for storage and use in dealer showrooms and boat shows. For craft up to 20,000 lbs. Ideal for wash downs and service at dry-stack facilities. Conveniently compact, racks are easy to store when not in use.
The Boat Rack system is comprised of a bow and a stern unit. The stern unit is offered in two widths, to accommodate virtually any hull shape. Made in the USA. Constructed from steel. When used with Brownell’s Boat Stands, the racks offer unmatched stability.
Height: 54
Width: 41.5
Length: 48
Weight: 126
STAINLESS STEEL FENDER RACK (TAYLOR)
A convenient place to stow fenders. Mounts on any rail and stanchion system. Movable J hooks accommodates 7/8″ rail and stanchion system, Tightens to blend with any angle. Cross-reinforced for extra strength. Holds any style fender.Holds “Big B” and “Hull Gard” fenders effectively. Folds flat for easy storage.
Height: 3
Width: 17
Length: 42
Weight: 1.374
EMERGENCY HAND CRANK (POWERWINCH)
For use with Powerwinch models when power is unavailable.
Height: 8.25
Width: 12.25
Length: 11.25
Weight: 4
HULL GARD® INFLATABLE VINYL FENDER (TAYLOR)
Oval-shaped design minimizes rolling motion and reduces hull rub. Molded-in eyelets withstand the constant pull and tug of everyday usage. Molded-in inflation valves allow you to customize the pressure for maximum effectiveness. Extra soft, tough and shiny. Valve seats are integrally molded into the fender, not glued in.
Height: 6.5
Width: 6.5
Length: 23
Weight: 2.166
ADJUSTABLE SEAT BASE & SPIDER – RIBBED SERIES (GARELICK)
2-7/8″ diameter stanchion tube, 9.25″ diameter base plate. Standard friction lock, locks at desired height. Positive lock spider, rotates 360°. Wobble-free design. Anodized aluminum tube.
Height: 12.5
Width: 9.38
Length: 9.38
Weight: 7.25
STORM GARD FENDERS (TAYLOR)
Our team of engineers has spent countless hours creating our patented True Color pearlescent-infused Storm Gard fenders. Pearlescent color mixes match the most popular colors used in today’s gelcoats and trim. Our patented color enhancement process provides deeper richer colors. Integrated color agents add luster in the sunlight. The ultimate finishing touch for your boat. Made in the USA. Lifetime Guarantee.
Height: 6
Width: 6
Length: 23
Weight: 2.2
PERSONAL WATERCRAFT BUOY (TAYLOR)
Can be used to mark hazards, fishing spots, race course or as fenders. 8″ round. Made of same quality vinyl used in Taylor’s HullGard fenders.
Height: 10
Width: 8
Length: 8
Weight: 1.366
LOW FREEBOARD FENDER (TAYLOR)
The first boat fender to address the needs of low freeboard boats. Shaped to protect the gunwales and rubrail. Offers superior protection compared to regular fenders against high docks. Low Freeboard fenders can be tied over the cleat to position it higher on the boat, putting protection where its needed. Made from specially formulated tough marine grade vinyl and features an inflation valve for air pressure adjestment.
Height: 15
Width: 5
Length: 5
Weight: 1.7
HULL GARD® INFLATABLE VINYL FENDER (TAYLOR)
Oval-shaped design minimizes rolling motion and reduces hull rub. Molded-in eyelets withstand the constant pull and tug of everyday usage. Molded-in inflation valves allow you to customize the pressure for maximum effectiveness. Extra soft, tough and shiny. Valve seats are integrally molded into the fender, not glued in.
Height: 6.5
Width: 6.5
Length: 23
Weight: 2.5
DOCK PRO™ SMALL EDGE GARD (TAYLOR)
Double molded vinyl dock edging is molded twice then molecularly bonded for extra durability and protection. A tough inner core is surrounded with our soft white vinyl for extra cushion against tough docks. Each piece installs easily to the edges of dock piers or floats with screws or nails.
Height: 2.5
Width: 15
Length: 15
Weight: 5.1
LOW FREEBOARD FENDER (TAYLOR)
The first boat fender to address the needs of low freeboard boats. Shaped to protect the gunwales and rubrail. Offers superior protection compared to regular fenders against high docks. Low Freeboard fenders can be tied over the cleat to position it higher on the boat, putting protection where its needed. Made from specially formulated tough marine grade vinyl and features an inflation valve for air pressure adjestment.
Height: 7.5
Width: 7
Length: 25
Weight: 4.05
25′ STRANDED WIRE HARNESS (POWERWINCH)
Wire your vehicle for permanent installation applications. Includes 25′ of 10 ga. positive wire, 10′ of black ground wire, 60 amp. circuit breaker, and winch plug.
Height: 9
Width: 9
Length: 10
Weight: 13
3-IN-1 SUPER SUPPORT POLE (TAYLOR)
This fully adjustable support pole is supplied with a male canvas snap, a grommet tip, and a plain end cap to fit any cover application. The pole is aluminum, with a durable plastic adjuster to set the correct height.
Height: 2.25
Width: 4
Length: 40.5
Weight: 2.5
STOW ‘N GO TRIANGLE DOCK BOX (TAYLOR)
Our durable UV-resistant polyethylene storage box is now available in a triangle configuration designed to accommodate most electric power units. Triangle shape allows the unit to fit snuggly in the little gusset found on most docks.
Height: 36
Width: 32
Length: 50
Weight: 50
Taylor Anchor/Mooring Parts & Accessories
Plastic rim pneumatic wheels with roller bearings will stand up to the harshest marine environment.
Height: 19
Width: 2.25
Length: 19
Weight: 2
FREE FALL ANCHOR WINDLASS (POWERWINCH)
Retrieval speed up to 80’/minute. Free fall design is up to 6 times faster than powering down. Housing is durable aluminum with triple finish nylon coating. Exclusive stainless steel rope and chain guidance system and stainless steel drive shaft stands up to years of use. Built with durable stainless steel fasteners that resist corrosion for easy removal. Features one piece motor plate for smooth power transmission & improved gear life, heat treated, oil impregnated gear system for smoother operation and watertight seals for additional protection against corrosion. Helm operated one touch control. Replaceable rode glide smoothly channels rope & chain below deck. Overall unit dimensions are: 10-9/16″ L x 7″ W x 6-5/16″ H.
Height: 10.31
Width: 8.06
Length: 14.25
Weight: 22
ELECTRIC TRAILER WINCH (POWERWINCH)
Remote power-in/freewheel-out operation. With positive lock when not winding. Easily operated with Tri-Matic Roll-n-Gage control. Efficient gear train system for smoother pulling action and less amperage draw. Level wind system prevents snarls and cable wear. Aircraft quality cable fitted with safety hook and super-tub ABS weather resistant housing. Comes with simple to install wiring harness with 80A circuit breaker. Hooks to any 12 volt auto or truck battery in minutes. Includes quick mount kit and remote control on-off lanyard. Includes hand crank, owner’s manual, and a 50′ cable fitted with safety hook. Models include pulley block for double line operation. 10″ deep, 10″ wide and 8″ high. 2 Year warranty.
Height: 10.31
Width: 8.06
Length: 14.25
Weight: 33
TUFF END™ INFLATABLE VINYL FENDER (TAYLOR)
Tuff End™ fenders are for heavy duty marine applications. Constructed from the same flexible, resilient vinyl as our Super Gard, Big B, and Hull Gard fenders, the end in each Tuff End is injection molded for extra strength and reliability. Tuff Ends are designed to perform under the most demanding conditions. Tuff End™ fenders feature seamless construction, the strongest in the industry!
Height: 8
Width: 8
Length: 27
Weight: 4.437
BIG B™ INFLATABLE VINYL FENDER (TAYLOR)
These fenders feature a tubular center for end-to-end line passage. Ribbed sides keep fenders in position and minimize roll. Built-in bi-valve allows you to inflate the fender to just the right pressure. Can be hung vertically or horizontally. Recommended inflation is 2 PSI. Extra soft, tough and shiny.
Height: 12
Width: 12
Length: 34
Weight: 14
PERSONAL WATERCRAFT BUOY (TAYLOR)
Can be used to mark hazards, fishing spots, race course or as fenders. 8″ round. Made of same quality vinyl used in Taylor’s HullGard fenders.
Height: 10
Width: 8
Length: 8
Weight: 1.366
FOLD N GO™ CHARCOAL GRILL (COLEMAN)
150 square inch cooking surface
Fast preheat using the unique chimney design
Easy to transport folding design
Convenient ash removal
- 150 square inch cooking surface
- Fast preheat using the unique chimney design
- Easy to transport folding design
- Convenient ash removal
Height: 14.6
Width: 6.69
Length: 13.5
Weight: 17.200001
Taylor Anchor/Mooring Parts & Accessories
Taylor Thermostat Control for D-Icer – 25° On/35° Off
Height: 8
Width: 3
Length: 8
Weight: 2
AER-O-BUOY RING BUOY (TAYLOR)
CCG Approved
Tough polyethylene outer shell resists gas, oil and saltwater. Closed cell foam core for buoyancy. Grab line threading system allows for easy replacement.
Height: 3.5
Width: 24
Length: 24
Weight: 5.75
BEACH SHADE (COLEMAN)
Features: Two hanging pockets inside, hand dry line and a floor mat and is equipped with a zippered closure front entry and rear vent. Easy to set up with 3 lightweight fiberglass shock-corded poles. Comes with fillable sandbags, and extra long stakes
Height: 6.6
Width: 6.6
Length: 14.7
Weight: 7.36
TUFF END™ INFLATABLE VINYL BUOY (TAYLOR)
Tuff End fender ends are made from injection molded vinyl tested to 2000 psi tensile strength. Features
large line holes that will accept standard shackles. The curved design hole prevents chafing.
Height: 27
Width: 27
Length: 34
Weight: 15.53
PONTOON GAZEBO (TAYLOR)
Top accommodates both 96″ and 102″ wide boats and extends out to 8 ft. of coverage. Constructed from Hot Shot™ marine grade polyester fabric, the top is strong yet light weight. It is supported by a shock-corded fiberglass pole framework that breaks down for easy storage. The large interior radius allows you to sit comfortably without bending over and provides excellent head room. Comes complete with shade top, frame, marine grade hardware and storage bag.
Height: 8
Width: 8
Length: 23
Weight: 9.4
ANCHORSHADE III (TAYLOR)
This uniquely designed 6′ x 6′ square, UV treated nylon umbrella can be used on almost any vessel from a small fishing boat to larger high performance boats. It is designed to be used when anchored or at idle speed on a calm day. AnchorShade® III offers improved design features such as stronger, larger diameter solid fiberglass structural ribs and hinge connectors. The aluminum frame is powder coated and has a 4 point locking height up to 8 feet. Adjustable straps and rubber non-skid floor end make installation flexible andf easy with no mounts or bases. Includes a heavy duty carrying case w/shoulder strap.
Height: 4.5
Width: 4.5
Length: 67
Weight: 13.5
STORM GARD FENDERS (TAYLOR)
Our team of engineers has spent countless hours creating our patented True Color pearlescent-infused Storm Gard fenders. Pearlescent color mixes match the most popular colors used in today’s gelcoats and trim. Our patented color enhancement process provides deeper richer colors. Integrated color agents add luster in the sunlight. The ultimate finishing touch for your boat. Made in the USA. Lifetime Guarantee.
Height: 8
Width: 8
Length: 26
Weight: 4.2
SUR-MOOR™ SHACKLE BUOY (TAYLOR)
The rope nest design has a built in cup shape at the top of the buoy that allows the anchor shackle to nest below the buoy surface. This recessed area helps shield the shackle from contacting the boat hull while making a convenient nesting place for the pennant line when the boat departs from the mooring. The hard-skin polyethylene shell is UV protected to resist the weathering effects of sunlight and is foam filled to positively displace water. Sandblasted finish. Tube Through-The-Center design with blue reflective striping. Hardware not included. T3C mooring collar recommended.
Height: 18.25
Width: 18.25
Length: 18.25
Weight: 11.7
STOW ‘N GO DOCK & PATIO STORAGE BOX (TAYLOR)
A durable polyethylene box that’s perfect for your dock, pool or patio. These boxes are manufactured with the highest quality U V-resistant polyethylene resin and is 100% maintenance-free. The double-walled lid is secured with a stainless latch, creating a weather proof design to ensure your contents remain protected and dry.
Height: 24
Width: 26
Length: 44
Weight: 33
ACCESS DOOR (SHRINKWRAP)
Features zipper closure.
Height: 3
Width: 18
Length: 30
Weight: 1.583
HULL GARD® INFLATABLE VINYL FENDER (TAYLOR)
Oval-shaped design minimizes rolling motion and reduces hull rub. Molded-in eyelets withstand the constant pull and tug of everyday usage. Molded-in inflation valves allow you to customize the pressure for maximum effectiveness. Extra soft, tough and shiny. Valve seats are integrally molded into the fender, not glued in.
Height: 5.5
Width: 5.5
Length: 20
Weight: 2
BREAKAWAY HINGE HARDWARE FOR SPORT/DIVER/BASSBOAT LADDERS (GARELICK)
Compatible with all sport/diver (Part #s 19802, 19803, 19804, 19833, 19834) and the bass boat ladder (model # 19812) mounting hardware. Made of anodized aluminum, the hinge features a breakaway pivot lock that shears a nylon bolt allowing the ladder to ride on the top of the water. A replacement nylon bolt is included. Shown with required face plate and hinge pin which are included with 99180 standard mount. 99180 Mount included with each ladder.
Height: 2
Width: 4
Length: 12.25
Weight: 2
BADMINTON (COLEMAN)
- Durable steel poles with tangle resistant net
- Four steel shafted, aluminum head racquets
- Four sport shuttlecocks
- Height indicator on poles for easy, consistent setup
- Durable polyester carry/storage bag
- Durable steel poles with tangle resistant net
- Four steel shafted, aluminum head racquets
- Four sport shuttlecocks
- Height indicator on poles for easy, consistent setup
- Durable polyester carry/storage bag
Height: 2.9
Width: 9.5
Length: 26.6
Weight: 4
ADJUSTABLE HEIGHT SEAT BASE & SPIDER – SMOOTH SERIES (GARELICK)
2-7/8″ diameter stanchion tube, 9″ diameter base plate. Locks at desired height. 4 prong spider swivels 360° and locks. Aluminum.
Height: 18.5
Width: 9.38
Length: 9.38
Weight: 8.25
GALVANIZED BOAT STANDS WITH TOP (BROWNELL BOAT STANDS)
Nestable and the most modern, inexpensive, safe method of shoring up boats. They are easily adjusted. Hot dipped galvanized finished. All bases are totally hot dip galvanized to ensure full coverage inside and out.
Height: 21
Width: 20
Length: 20
Weight: 19
PONTOON FENDER (TAYLOR)
Specifically designed for the needs of pontoon boaters. Fenders are made from marine grade, UV resistant vinyl and have an integrated rubber football style valve. The corner bumpers mount over the original factory installed aluminum corner section to provide air cushioning impact protection when docking. Corners are molded from a special gray PVC and are secured with stainless fasteners.
Height: 3
Width: 4
Length: 15
Weight: 2.166
UNIVERSAL T-TOP CONSOLE COVERS (TAYLOR)
Trailerable T-Top console cover is secured to the underside of the fixed T-Top structure and will enclose any size console, helm seat and T-top support combination with a maximum base perimeter (at the deck) of 18′ or less. 48″ W x 60″ L x 66″ H.
Height: 4
Width: 16
Length: 17.5
Weight: 4
TUFF END™ INFLATABLE VINYL BUOY (TAYLOR)
Tuff End fender ends are made from injection molded vinyl tested to 2000 psi tensile strength. Features
large line holes that will accept standard shackles. The curved design hole prevents chafing.
Height: 12
Width: 12
Length: 17
Weight: 3.302
TUFF END™ INFLATABLE VINYL FENDER (TAYLOR)
Tuff End™ fenders are for heavy duty marine applications. Constructed from the same flexible, resilient vinyl as our Super Gard, Big B, and Hull Gard fenders, the end in each Tuff End is injection molded for extra strength and reliability. Tuff Ends are designed to perform under the most demanding conditions. Tuff End™ fenders feature seamless construction, the strongest in the industry!
Height: 6
Width: 6
Length: 25
Weight: 2.87
Taylor Anchor/Mooring Parts & Accessories
Taylor Thermostat Control for D-Icer – 30° On/40° Off
Height: 8
Width: 3
Length: 8
Weight: 2
STORM GARD FENDERS (TAYLOR)
Our team of engineers has spent countless hours creating our patented True Color pearlescent-infused Storm Gard fenders. Pearlescent color mixes match the most popular colors used in today’s gelcoats and trim. Our patented color enhancement process provides deeper richer colors. Integrated color agents add luster in the sunlight. The ultimate finishing touch for your boat. Made in the USA. Lifetime Guarantee.
Height: 5
Width: 5
Length: 20
Weight: 1.7
TUFF END™ INFLATABLE VINYL FENDER (TAYLOR)
Tuff End™ fenders are for heavy duty marine applications. Constructed from the same flexible, resilient vinyl as our Super Gard, Big B, and Hull Gard fenders, the end in each Tuff End is injection molded for extra strength and reliability. Tuff Ends are designed to perform under the most demanding conditions. Tuff End™ fenders feature seamless construction, the strongest in the industry!
Height: 19
Width: 19
Length: 50
Weight: 23.200001
HULL GARD® INFLATABLE VINYL FENDER (TAYLOR)
Oval-shaped design minimizes rolling motion and reduces hull rub. Molded-in eyelets withstand the constant pull and tug of everyday usage. Molded-in inflation valves allow you to customize the pressure for maximum effectiveness. Extra soft, tough and shiny. Valve seats are integrally molded into the fender, not glued in.
Height: 5.5
Width: 5.5
Length: 20
Weight: 2
MOTOR BOAT STAND WITH TOP (BROWNELL BOAT STANDS)
Stackable and the most modern, inexpensive, safe method of shoring up boats. They are easily adjusted. Have angled iron tread plates to prevent damage to pavement. Full length center pipe on all sizes for stability and thread protection. All bases are totally submerged in paint to ensure full coverage inside and out.
Height: 37
Width: 20
Length: 20
Weight: 22
HULL GARD® INFLATABLE VINYL FENDER (TAYLOR)
Oval-shaped design minimizes rolling motion and reduces hull rub. Molded-in eyelets withstand the constant pull and tug of everyday usage. Molded-in inflation valves allow you to customize the pressure for maximum effectiveness. Extra soft, tough and shiny. Valve seats are integrally molded into the fender, not glued in.
Height: 6.5
Width: 6.5
Length: 23
Weight: 2.5
HYDRAULIC BOAT LIFTING SYSTEM (BROWNELL)
Height: 59
Width: 24
Length: 34
Weight: 263
24′ CLASS PONTOON ROPE ANCHOR WINDLASS (POWERWINCH)
Power your anchor in or out at the touch of a switch. Designed especially for pontoon, pike and bass boats. With a beefy line pull of 100 lbs., this unit retrieves the anchor at the rate of 80 ft. per minute. For river, mushroom or navy type anchor – anchor not included. 100′ line, remote switch and circuit breaker.
Height: 6.69
Width: 10.44
Length: 17.629999
Weight: 19
120 QUART XTREME® 5 COOLER (COLEMAN)
- Insulated lid and case for 6 day ice retention
- No crush comfort handles
- Have-a-Seat lid with embossed angler fishing ruler and cup holders
- Rust-proof, leak resistant channel drain
- Keep food and drinks cold for nearly a week
- Extra ThermOZONE™ Insulation keeps the cooler cold in temperatures up to 90° F
- No crush comfort handles
- Have-a-Seat lid with embossed angler fishing ruler and cup holders
- Rust-proof, leak resistant channel drain
Height: 18.870001
Width: 19.25
Length: 37.060001
Weight: 25
TUFF END™ INFLATABLE VINYL BUOY (TAYLOR)
Tuff End fender ends are made from injection molded vinyl tested to 2000 psi tensile strength.
Features: large line holes that will accept standard shackles. The curved design hole prevents chafing.
Height: 15
Width: 15
Length: 20
Weight: 6.903
WATERTIGHT CONTAINER (COLEMAN)
Keep important gear like matches, boat licenses and camping permits dry inside the Coleman® Watertight Container. This canister includes a silicone sealing ring to keep water out and a lid latch to keep it shut tight. It also comes with an aluminum alloy carabiner to hook the container to the outside of a backpack.
Height: 4.25
Width: 6.5
Length: 6.75
Weight: 0.9
THE SPOILER™ INFLATABLE LOW DRAG BUOYS (TAYLOR)
Everything about The Spoiler is carefully designed to give fishing operations optimal buoy performance over the long haul.
The Spoiler’s unique, more rounded shape produces greater buoyancy and lower drag when compared with other well known makes. Ribbed design also helps keep drag to an absolute minimum. Independent testing shows that The Spoiler has on average 82% less drag than conventional round buoys. Stable color formulation protects against sun and ensures buoy will never fade to white.
Height: 13
Width: 24
Length: 13
Weight: 5.53
THE SPOILER™ INFLATABLE LOW DRAG BUOYS (TAYLOR)
Everything about The Spoiler is carefully designed to give fishing operations optimal buoy performance over the long haul.
The Spoiler’s unique, more rounded shape produces greater buoyancy and lower drag when compared with other well known makes. Ribbed design also helps keep drag to an absolute minimum. Independent testing shows that The Spoiler has on average 82% less drag than conventional round buoys. Stable color formulation protects against sun and ensures buoy will never fade to white.
Height: 13
Width: 24
Length: 13
Weight: 5.53
HEAT TOOL KIT (SHRINKWRAP)
A lightweight (2.1 pound), durable and powerful propane fueled heating unit. It puts out 300,000 BTU’s at maximum power, but is variable from 10,000 BTU’s upward through use of the trigger. Kit includes: 25′ hose, adjustable regulator, 4″ & 18″ extensions and a training video.
Height: 4
Width: 15
Length: 24
Weight: 13
TUFF END™ INFLATABLE VINYL BUOY (TAYLOR)
Tuff End fender ends are made from injection molded vinyl tested to 2000 psi tensile strength. Features
large line holes that will accept standard shackles. The curved design hole prevents chafing.
Height: 21
Width: 21
Length: 29
Weight: 11.373
STORM GARD FENDERS (TAYLOR)
Our team of engineers has spent countless hours creating our patented True Color pearlescent-infused Storm Gard fenders. Pearlescent color mixes match the most popular colors used in today’s gelcoats and trim. Our patented color enhancement process provides deeper richer colors. Integrated color agents add luster in the sunlight. The ultimate finishing touch for your boat. Made in the USA. Lifetime Guarantee.
Height: 8
Width: 8
Length: 26
Weight: 4.2
HULL GARD® INFLATABLE VINYL FENDER (TAYLOR)
Oval-shaped design minimizes rolling motion and reduces hull rub. Molded-in eyelets withstand the constant pull and tug of everyday usage. Molded-in inflation valves allow you to customize the pressure for maximum effectiveness. Extra soft, tough and shiny. Valve seats are integrally molded into the fender, not glued in.
Height: 5.5
Width: 5.5
Length: 20
Weight: 2
4AA LED WORKLIGHT (COLEMAN)
4AA LED Worklight
- Pivoting head and body for hands-free lighting
- Rotating rubber bezel controls spot to flood
- High/Low settings (Runs up to 17 hours on low power, between five and six hours on high power)
- Includes 4 AA batteries
Height: 12.25
Width: 4.25
Length: 8.75
Weight: 1.3
URBAN SOFT COOLERS (COLEMAN)
Soft coolers that won’t collapse under pressure
- Removable hard liner to use with or without ice
- Heat-Welded seams prevent leaks
- Front zippered pocket
Height: 12.99
Width: 10.11
Length: 12.36
Weight: 1.51
SIDE MOUNT ACRYLIC TABLE (GARELICK)
Anodized aluminum table leg with oval acrylic coated ABS table top.
Table leg removes from side mount bracket
Spring loaded locking pin holds table leg in place
- Anodized aluminum table leg with oval acrylic coated ABS table top.
- Table leg removes from side mount bracket
- Spring loaded locking pin holds table leg in place
Height: 17.5
Width: 6.13
Length: 33.5
Weight: 9
SULLY STICK™ WINTER STICK (TAYLOR)
Sully Stick™ winter stick – A long tapered buoy used in place of a standard round mooring buoy during the winter months. The Sully Stick has a molded in eyelet at the top for easy retrieval. The base eyelet is reinforced with a galvanized metal bushing to attach a rope and connect to the anchor chain. The shape of the Sully stick helps it escape ice entrapment better than a round buoy and can extend the useful life of a mooring buoy by protecting it from the damaging effects of freezing temperatures.
Height: 6
Width: 6
Length: 80
Weight: 15
BIG B™ INFLATABLE VINYL FENDER (TAYLOR)
These fenders feature a tubular center for end-to-end line passage. Ribbed sides keep fenders in position and minimize roll. Built-in bi-valve allows you to inflate the fender to just the right pressure. Can be hung vertically or horizontally. Recommended inflation is 2 PSI. Extra soft, tough and shiny.
Height: 6
Width: 6
Length: 15
Weight: 2.5
BUOY HARDWARE (TAYLOR)
1/2″ diameter hot-dipped galvanized rod with 4″ long swivel, 2 galvanized washers and nylon care lock nut.
Height: 0.5
Width: 3.5
Length: 21.25
Weight: 2.3
PONTOON FENDER (TAYLOR)
Specifically designed for the needs of pontoon boaters. Fenders are made from marine grade, UV resistant vinyl and have an integrated rubber football style valve. Fits snugly between the pontoon and the deck of the boat.
Height: 16
Width: 8
Length: 9.25
Weight: 4.7
GALVANIZED BOAT STANDS WITH TOP (BROWNELL BOAT STANDS)
Nestable and the most modern, inexpensive, safe method of shoring up boats. They are easily adjusted. Hot dipped galvanized finished. All bases are totally hot dip galvanized to ensure full coverage inside and out.
Height: 75
Width: 58
Length: 58
Weight: 47
HULL GARD® INFLATABLE VINYL FENDER (TAYLOR)
Oval-shaped design minimizes rolling motion and reduces hull rub. Molded-in eyelets withstand the constant pull and tug of everyday usage. Molded-in inflation valves allow you to customize the pressure for maximum effectiveness. Extra soft, tough and shiny. Valve seats are integrally molded into the fender, not glued in.
Height: 10.5
Width: 10.5
Length: 30
Weight: 9
2-7/8″ FIXED HEIGHT PEDESTAL SERIES – SMOOTH SERIES (GARELICK)
Stanchion tube, 9.25″ diameter 6 hole base plate. Provides solid base of support for a variety of seat hardware. Anodized protective finish. Mounts Garelick fore and aft seat slides and 360° swivel spider combinations. Accepts seat slides: 22000, 75080, 75081, 75082 and 75083. Swivel spiders: 99023, and 99036.
Height: 12.5
Width: 9.38
Length: 9.38
Weight: 4
2-7/8 STOWABLE TABLE PEDESTAL FOR LARGER BOATS (GARELICK)
3 piece, all-aluminum provides solid table base
Fluted profile stanchion with protective anodized finish
Set includes surface mount base, pedestal and flush mount base
Quick stowage
9-1/4″ Anodized aluminum base
- 3 piece, all-aluminum provides solid table base
- Fluted profile stanchion with protective anodized finish
- Set includes pedestal and flush mount base
- Quick stowage
- 9-1/4″ Anodized aluminum base
Height: 33.130001
Width: 9.13
Length: 9.13
Weight: 10
STORM GARD FENDERS (TAYLOR)
Our team of engineers has spent countless hours creating our patented True Color pearlescent-infused Storm Gard fenders. Pearlescent color mixes match the most popular colors used in today’s gelcoats and trim. Our patented color enhancement process provides deeper richer colors. Integrated color agents add luster in the sunlight. The ultimate finishing touch for your boat. Made in the USA. Lifetime Guarantee.
Height: 6
Width: 6
Length: 23
Weight: 2.2
Garelick Hardware Parts & Accessories
Spare Gullwing Transom Mounting Bracket
Height: 3.75
Width: 1.5
Length: 5
Weight: 2
PERSONAL WATERCRAFT BUOY (TAYLOR)
Can be used to mark hazards, fishing spots, race course or as fenders. 8″ round. Made of same quality vinyl used in Taylor’s HullGard fenders.
Height: 10
Width: 8
Length: 8
Weight: 1.366
GALVANIZED BOAT STANDS WITH TOP (BROWNELL BOAT STANDS)
Nestable and the most modern, inexpensive, safe method of shoring up boats. They are easily adjusted. Hot dipped galvanized finished. All bases are totally hot dip galvanized to ensure full coverage inside and out.
Height: 44
Width: 41
Length: 41
Weight: 30
SUR-MOOR™ T3C™ BUOY (TAYLOR)
Hard skin mooring buoys have a seamless and tough, one-piece polyethylene shell. Hard skin shells feature ultraviolet light absorbers for long-term life under the sun. Filled with EPS foam to positively displace water. Tube-through-the-center design. Three-Year Flotation warranty. Textured finish to enhance paint adhesion.
- The “ET” models have:
- Extended tube is 2.5″ high off the top of the ball
- Extended tube is reinforced with secondary schedule 40 (double thickness) and rolled over for extra strength
- Tube is drilled with a 21/64″ hole 3/4″ down from top to easily secure chain if desired
Height: 13
Width: 12.25
Length: 12.25
Weight: 3.8
LOW FREEBOARD FENDER (TAYLOR)
The first boat fender to address the needs of low freeboard boats. Shaped to protect the gunwales and rubrail. Offers superior protection compared to regular fenders against high docks. Low Freeboard fenders can be tied over the cleat to position it higher on the boat, putting protection where its needed. Made from specially formulated tough marine grade vinyl and features an inflation valve for air pressure adjestment.
Height: 5
Width: 5
Length: 15
Weight: 2
ANCHORSHADE III (TAYLOR)
This uniquely designed 6′ x 6′ square, UV treated nylon umbrella can be used on almost any vessel from a small fishing boat to larger high performance boats. It is designed to be used when anchored or at idle speed on a calm day. AnchorShade® III offers improved design features such as stronger, larger diameter solid fiberglass structural ribs and hinge connectors. The aluminum frame is powder coated and has a 4 point locking height up to 8 feet. Adjustable straps and rubber non-skid floor end make installation flexible andf easy with no mounts or bases. Includes a heavy duty carrying case w/shoulder strap.
Height: 4.5
Width: 4.5
Length: 67
Weight: 13.5
PONTOON FENDER (TAYLOR)
Pontoon fener specifically designed for the needs of pontoon boaters. Fenders are made from marine grade, UV resistant vinyl and have an integrated rubber football style valve. Fits snugly between the pontoon and the deck of the boat. 9″W x 16″L. Silver.
Height: 16
Width: 8
Length: 9.25
Weight: 4
PONTOON GAZEBO (TAYLOR)
Top accommodates both 96″ and 102″ wide boats and extends out to 8 ft. of coverage. Constructed from Hot Shot™ marine grade polyester fabric, the top is strong yet light weight. It is supported by a shock-corded fiberglass pole framework that breaks down for easy storage. The large interior radius allows you to sit comfortably without bending over and provides excellent head room. Comes complete with shade top, frame, marine grade hardware and storage bag.
Height: 8
Width: 8
Length: 23
Weight: 9.4
REGULATORY BUOY (TAYLOR)
Made out of white polyethylene with closed cell foam inside. 37″ shows above the water line. Accepts all Sur Mark warning labels, not included.
Height: 61
Width: 9
Length: 9
Weight: 43
STORM GARD FENDERS (TAYLOR)
Our team of engineers has spent countless hours creating our patented True Color pearlescent-infused Storm Gard fenders. Pearlescent color mixes match the most popular colors used in today’s gelcoats and trim. Our patented color enhancement process provides deeper richer colors. Integrated color agents add luster in the sunlight. The ultimate finishing touch for your boat. Made in the USA. Lifetime Guarantee.
Height: 5
Width: 5
Length: 20
Weight: 1.7
HULL GARD® INFLATABLE VINYL FENDER (TAYLOR)
Oval-shaped design minimizes rolling motion and reduces hull rub. Molded-in eyelets withstand the constant pull and tug of everyday usage. Molded-in inflation valves allow you to customize the pressure for maximum effectiveness. Extra soft, tough and shiny. Valve seats are integrally molded into the fender, not glued in.
Height: 23.25
Width: 12.5
Length: 18
Weight: 2.08
ANCHORSHADE III (TAYLOR)
This uniquely designed 6′ x 6′ square, UV treated nylon umbrella can be used on almost any vessel from a small fishing boat to larger high performance boats. It is designed to be used when anchored or at idle speed on a calm day. AnchorShade® III offers improved design features such as stronger, larger diameter solid fiberglass structural ribs and hinge connectors. The aluminum frame is powder coated and has a 4 point locking height up to 8 feet. Adjustable straps and rubber non-skid floor end make installation flexible andf easy with no mounts or bases. Includes a heavy duty carrying case w/shoulder strap.
Height: 4.5
Width: 4.5
Length: 67
Weight: 13.5
ACTIVE SEAT SUSPENSION SYSTEM (GARELICK)
Provides boaters with a smoother ride in all types of weather and water conditions. Absorb and minimize up to 75% of the shock, jolt and vibration transmitted to the passenger. Corrosive resistant and UV stable. Standard bolt hole pattern allows for mounting on top of pedestal and beneath any individual seat. Features heavy duty forward hinge system allowing shock absorption to occur in the vertical plane only, eliminating unnecessary side sway and tipping. Includes provisions for mounting seats with 6″ center hole pattern. Rugged, high tensile anodized aluminum and stainless steel hardware construction. Compatible with all Garelick pedestal seat bases.
Standard 5″ x 12-1/8″ slotted mounting hole pattern. Compact size and low profile design adds only 2″ of height.
Height: 2.25
Width: 7.56
Length: 13
Weight: 5.5
TUFF END™ INFLATABLE VINYL FENDER (TAYLOR)
Solid vinyl ends for extra strength. Dual purpose bivalve construction. Inflate with hand pump and football-type pin or simply remove screw-in tri-valve and use foot pump or similar high pressure device. Removal also allows rapid deflation. Recommended inflation is 2 PSI. High performance and looks great.
Height: 10
Width: 10
Length: 30
Weight: 5.85
GALVANIZED BOAT STANDS WITH TOP (BROWNELL BOAT STANDS)
Nestable and the most modern, inexpensive, safe method of shoring up boats. They are easily adjusted. Hot dipped galvanized finished. All bases are totally hot dip galvanized to ensure full coverage inside and out.
Height: 29
Width: 20
Length: 20
Weight: 21
HULL GARD® INFLATABLE VINYL FENDER (TAYLOR)
Oval-shaped design minimizes rolling motion and reduces hull rub. Molded-in eyelets withstand the constant pull and tug of everyday usage. Molded-in inflation valves allow you to customize the pressure for maximum effectiveness. Extra soft, tough and shiny. Valve seats are integrally molded into the fender, not glued in.
Height: 8.5
Width: 8.5
Length: 27
Weight: 5.25
Taylor Anchor/Mooring Parts & Accessories
Replacement Basket
Height: 13
Width: 38
Length: 46
Weight: 35
HULL GARD® INFLATABLE VINYL FENDER (TAYLOR)
Oval-shaped design minimizes rolling motion and reduces hull rub. Molded-in eyelets withstand the constant pull and tug of everyday usage. Molded-in inflation valves allow you to customize the pressure for maximum effectiveness. Extra soft, tough and shiny. Valve seats are integrally molded into the fender, not glued in.
Height: 8.5
Width: 8.5
Length: 27
Weight: 5.25
BIG B™ INFLATABLE VINYL FENDER (TAYLOR)
These fenders feature a tubular center for end-to-end line passage. Ribbed sides keep fenders in position and minimize roll. Built-in bi-valve allows you to inflate the fender to just the right pressure. Can be hung vertically or horizontally. Recommended inflation is 2 PSI. Extra soft, tough and shiny.
Height: 6
Width: 6
Length: 15
Weight: 2.5
DOCK PRO™ HEAVY DUTY DOCK BUMPER (TAYLOR)
Heavy duty vinyl dock bumpers are ideal for rough conditions, and can take a beating. Made from UV resistant marine grade vinyl. The straight piece can be mounted horizontally, or the curved back allows for vertical mounting on pilings. Both bumpers have inflation valves for easy adjustment. Pre-drilled for easy, permanent mounting with plated fasteners.
Height: 6
Width: 4.5
Length: 37
Weight: 9
PONTOON FENDER (TAYLOR)
Specifically designed for the needs of pontoon boaters. Fenders are made from marine grade, UV resistant vinyl and have an integrated rubber football style valve. The corner bumpers mount over the original factory installed aluminum corner section to provide air cushioning impact protection when docking. Corners are molded from a special gray PVC and are secured with stainless fasteners.
Height: 3.5
Width: 3
Length: 12
Weight: 2.166
STORM GARD FENDERS (TAYLOR)
Our team of engineers has spent countless hours creating our patented True Color pearlescent-infused Storm Gard fenders. Pearlescent color mixes match the most popular colors used in today’s gelcoats and trim. Our patented color enhancement process provides deeper richer colors. Integrated color agents add luster in the sunlight. The ultimate finishing touch for your boat. Made in the USA. Lifetime Guarantee.
Height: 5
Width: 5
Length: 20
Weight: 1.7
MARINE FOLDING DECK CHAIR (COLEMAN)
Ergonomically angled seatback and armrests
Padded back, seat and armrests
Rust resistant aluminum frame
Washable armrests
Built-in carry straps
- Ergonomically angled seatback and armrests
- Padded back, seat and armrests
- Rust resistant aluminum frame
- Washable armrests
- Built-in carry straps
Height: 31.25
Width: 7
Length: 21.5
Weight: 8
POST BUMPER (TAYLOR)
Great protection for pipe supported type docks. Molded from marine grade vinyl with an inflation valve to adjust firmness. Slides over 1-1/2″ dock pipe.
Height: 6
Width: 6
Length: 15
Weight: 4.166
LIFE RING BUOY (TAYLOR)
Inspected and tested in accordance with U. S. Coast Guard regulations. Rings contain unicellular polyurethane foam for buoyancy. Molded-in becket design means there are no straps to wear, mildew, or deteriorate.
Vinyl coated foam.
Height: 3
Width: 24
Length: 24
Weight: 4
COMMANDER II 4.0 GAS RISE PEDESTAL (GARELICK)
With oversized anodized aluminum tubing, solid stainless steel slide rails, and delrin bearing rods the hand built Commander system makes a statement of class aboard any large boat or yacht. 360 degree free rotation or positive lock in 45 degree increments – single lever operation with drag adjustment for optimal performance. 6″ of fore and aft travel with positive locking at 1″ increments. Solid 1″ stainless steel slide rails with lubrication system are operated with a single lever for effortless and smooth precision operation. The 12″ diameter base provides a solid, wobble free mount. Provides 112 lbs. of lift force.
Height: 25.190001
Width: 17.190001
Length: 22.120001
Weight: 48
GALVANIZED BOAT STANDS WITH TOP (BROWNELL BOAT STANDS)
Nestable and the most modern, inexpensive, safe method of shoring up boats. They are easily adjusted. Hot dipped galvanized finished. All bases are totally hot dip galvanized to ensure full coverage inside and out.
Height: 37
Width: 20
Length: 20
Weight: 22
FREE FALL ANCHOR WINDLASS (POWERWINCH)
Retrieval speed up to 80’/minute. Free fall design is up to 6 times faster than powering down. Housing is durable aluminum with triple finish nylon coating. Exclusive stainless steel rope and chain guidance system and stainless steel drive shaft stands up to years of use. Built with durable stainless steel fasteners that resist corrosion for easy removal. Features one piece motor plate for smooth power transmission & improved gear life, heat treated, oil impregnated gear system for smoother operation and watertight seals for additional protection against corrosion. Helm operated one touch control. Replaceable rode glide smoothly channels rope & chain below deck. Overall unit dimensions are: 10-9/16″ L x 7″ W x 6-5/16″ H.
Height: 10.31
Width: 8.06
Length: 14.25
Weight: 21
DOCK PRO™ SMALL EDGE GARD (TAYLOR)
Double molded vinyl dock edging is molded twice then molecularly bonded for extra durability and protection. A tough inner core is surrounded with our soft white vinyl for extra cushion against tough docks. Each piece installs easily to the edges of dock piers or floats with screws or nails.
Height: 3.75
Width: 15.5
Length: 15.5
Weight: 5
STORM GARD FENDERS (TAYLOR)
Our team of engineers has spent countless hours creating our patented True Color pearlescent-infused Storm Gard fenders. Pearlescent color mixes match the most popular colors used in today’s gelcoats and trim. Our patented color enhancement process provides deeper richer colors. Integrated color agents add luster in the sunlight. The ultimate finishing touch for your boat. Made in the USA. Lifetime Guarantee.
Height: 5
Width: 5
Length: 20
Weight: 1.7
DRY GEAR BAG (COLEMAN)
Reinforced materials keep items dry and protected. Easy to use quick release buckle. Rounded base increases total capacity. Fabric loops allow bag to be secured or tied down.
Height: 1.2
Width: 7.3
Length: 13.1
Weight: 2.25
PILING GUARD (TAYLOR)
Designed for both heavy-duty and standard impact situations – especially for fuel docks, high impact areas and protection against large watercrafts
- Contains over 25% more material when compared to other edging in the market
- Curved base conforms to piling for snug, long-lasting installation
- Can be mounted on flat surfaces
- UV stabilized gray, non marking material
NOTE: Pre-drilling holes in Piling Guards is required.
10 foot lengths – Start 2″ from each end and drill holes 16.5″ on center*. Once pre-drilled holes are placed, install edging using stainless steel 3/8″ x 2″ (for piling guard) and 1/2″ x 4″ (for omega piling guard) long lag screws backed with a square washer.
Non-scuffing heavy duty profiles absorb impact from any direction and stay put, protecting boats, pilings and reputations.
- Designed for both heavy-duty and standard impact situations – especially for fuel docks, high impact areas and protection against large watercraft
- Curved base conforms to piling for snug, long-lasting installation
- Can also be mounted on flat surfaces
- UV stabilized gray, non-marking material
- NOTE: Pre-drilling holes in Piling Guards is required
Height: 4.25
Width: 6.25
Length: 120
Weight: 51
URBAN SOFT COOLERS (COLEMAN)
Soft coolers that won’t collapse under pressure
- Removable hard liner to use with or without ice
- Heat-Welded seams prevent leaks
- Front zippered pocket
Height: 8.5
Width: 7.08
Length: 10.23
Weight: 1.096
BIG B™ INFLATABLE VINYL FENDER (TAYLOR)
These fenders feature a tubular center for end-to-end line passage. Ribbed sides keep fenders in position and minimize roll. Built-in bi-valve allows you to inflate the fender to just the right pressure. Can be hung vertically or horizontally. Recommended inflation is 2 PSI. Extra soft, tough and shiny.
Height: 12
Width: 12
Length: 34
Weight: 10.97
PONTOON GAZEBO (TAYLOR)
Top accommodates both 96″ and 102″ wide boats and extends out to 8 ft. of coverage. Constructed from Hot Shot™ marine grade polyester fabric, the top is strong yet light weight. It is supported by a shock-corded fiberglass pole framework that breaks down for easy storage. The large interior radius allows you to sit comfortably without bending over and provides excellent head room. Comes complete with shade top, frame, marine grade hardware and storage bag.
Height: 8
Width: 8
Length: 23
Weight: 9.4
HULL GARD® INFLATABLE VINYL FENDER (TAYLOR)
Oval-shaped design minimizes rolling motion and reduces hull rub. Molded-in eyelets withstand the constant pull and tug of everyday usage. Molded-in inflation valves allow you to customize the pressure for maximum effectiveness. Extra soft, tough and shiny. Valve seats are integrally molded into the fender, not glued in.
Height: 8.5
Width: 8.5
Length: 27
Weight: 5.25
GALVANIZED BOAT STANDS WITH TOP (BROWNELL BOAT STANDS)
Nestable and the most modern, inexpensive, safe method of shoring up boats. They are easily adjusted. Hot dipped galvanized finished. All bases are totally hot dip galvanized to ensure full coverage inside and out.
Height: 60
Width: 48
Length: 48
Weight: 39
MOTOR BOAT STAND WITH TOP (BROWNELL BOAT STANDS)
Stackable and the most modern, inexpensive, safe method of shoring up boats. They are easily adjusted. Have angled iron tread plates to prevent damage to pavement. Full length center pipe on all sizes for stability and thread protection. All bases are totally submerged in paint to ensure full coverage inside and out.
Height: 50
Width: 19
Length: 19
Weight: 28
TRANSOM FENDER (TAYLOR)
Shaped to fit the stern of a sailboat or the edge of most swim platforms up to 4″ thick. An integral 3/4″ diameter tube allows a securing line to pass from end to end while a countered shape helps grip the fendering location. Inflation valve to adjust the level of firmness to satisfy all applications.
Height: 11
Width: 11
Length: 22
Weight: 6
Stanchion tube, 9.25″ diameter 6 hole base plate. Provides solid base of support for a variety of seat hardware. Anodized protective finish. Mounts Garelick fore and aft seat slides and 360° swivel spider combinations. Accepts seat slides: 22000, 75080, 75081, 75082 and 75083. Swivel spiders: 99023, and 99036.
Height: 18.5
Width: 9.38
Length: 9.38
Weight: 6
ROADTRIP® GRILL LXE (COLEMAN)
Accessories:
Grill Cover: Versatile heavy-duty PVC coated material resists cracking and fading. Full-length cover shields grill from the elements. Adjustable straps secure cover in windy conditions.
Wheeled Carry Case: Heavy-duty construction with easy-glide wheels for portability.
Griddle: Heavy-duty, porcelain-coated, cast-iron contruction is easy to clean and durable. Approximately 12″ x 12″ and weighs 7 lbs.
Iron Grate: Porcelain-coated, cast-iron materials ensure a long life for the product.
Pot Support: Durable, chrome-plated, steel wire construction. Perfect for simmering sauces, cooking soups or boiling vegetables for any meal.
Accessories:
Pot Support: Durable, chrome-plated, steel wire construction. Perfect for simmering sauces, cooking soups or boiling vegetables for any meal.
Grill Cover: Versatile heavy-duty PVC coated material resists cracking and fading. Full-length cover shields grill from the elements. Adjustable straps secure cover in windy conditions.
Wheeled Carry Case: Heavy-duty construction with easy-glide wheels for portability.
Iron Grate: Porcelain-coated, cast-iron materials ensure a long life for the product.
Griddle: Heavy-duty, porcelain-coated, cast-iron construction is easy to clean and durable. Approximately 12″ x 12″ and weighs 7 lbs.
Height: 19.370001
Width: 14.06
Length: 33.25
Weight: 51.799999
STEP-SAFE™ DOCK STEP (TAYLOR)
Molded in durable UV resistant polyethylene with non-slip pad on top of each step. 1-1/2″ wide flange provides adequate mounting surface for docks. Hand rails are available for two and three step models, sold separately.
Height: 1.5
Width: 19.700001
Length: 49
Weight: 19.5
DOCK POST PVC GUIDE WHEEL (TAYLOR)
Flexible PVC dock wheels are designed to rotate around standard 1.5″ dock pipe. Made of heavy duty marine grade vinyl with wear resistant center axle bushing. Wheels can be placed over standard 1.5″ diameter pipe for use as free floating boat guides or can be mounted to any custom dock bracket which uses 1.5″ diameter pipe. Wheels can be stacked together for added protection.
- Molded from UV resistant, Marine Grade Vinyl
- 14″ Diameter with 2″ inside diameter reinforcement bushing.
- Inflation valve to adjust firmness
- Molded from UV resistant, Marine Grade Vinyl
- 2″ inside diameter reinforcement bushing.
- Inflation valve to adjust firmness
Height: 6
Width: 14
Length: 14
Weight: 4.5
ESKY® MARINE COOLERS (COLEMAN)
- Built in tie down points
- Exoskeletion scratch resistant texture on high impact areas
- Heavy-Duty rubber latches
- Integrated large knuckle hinges
- Padlock attachment for lock tight security
- Non-skid feet
- Built in tie down points
- Exoskeletion scratch resistant texture on high impact areas
- Heavy-Duty rubber latches
- Integrated large knuckle hinges
- Padlock attachment for lock tight security
- Non-skid feet
Height: 19.879999
Width: 19.809999
Length: 27.629999
Weight: 35
STEP-SAFE™ DOCK STEP (TAYLOR)
Molded in durable UV resistant polyethylene with non-slip pad on top of each step. 1-1/2″ wide flange provides adequate mounting surface for docks. Hand rails are available for two and three step models, sold separately.
Height: 17.5
Width: 23.5
Length: 26.5
Weight: 18.5
HULL GARD® INFLATABLE VINYL FENDER (TAYLOR)
Oval-shaped design minimizes rolling motion and reduces hull rub. Molded-in eyelets withstand the constant pull and tug of everyday usage. Molded-in inflation valves allow you to customize the pressure for maximum effectiveness. Extra soft, tough and shiny. Valve seats are integrally molded into the fender, not glued in.
Height: 10.5
Width: 10.5
Length: 30
Weight: 9
THE SPOILER™ INFLATABLE LOW DRAG BUOYS (TAYLOR)
Everything about The Spoiler is carefully designed to give fishing operations optimal buoy performance over the long haul.
The Spoiler’s unique, more rounded shape produces greater buoyancy and lower drag when compared with other well known makes. Ribbed design also helps keep drag to an absolute minimum. Independent testing shows that The Spoiler has on average 82% less drag than conventional round buoys. Stable color formulation protects against sun and ensures buoy will never fade to white.
Height: 13
Width: 24
Length: 13
Weight: 5.53
RING BUOY HOLDER W/HEAVING LINE (TAYLOR)
Ring holder is constructed from anodized aluminum. Fits all sizes of ring buoys. Comes complete with 30′ or 60′ mildew resistant, white U.V. polypropylene floating heaving line with attached rope float.
Height: 6
Width: 6.25
Length: 11
Weight: 12
ANCHORSHADE III (TAYLOR)
This uniquely designed 6′ x 6′ square, UV treated nylon umbrella can be used on almost any vessel from a small fishing boat to larger high performance boats. It is designed to be used when anchored or at idle speed on a calm day. AnchorShade® III offers improved design features such as stronger, larger diameter solid fiberglass structural ribs and hinge connectors. The aluminum frame is powder coated and has a 4 point locking height up to 8 feet. Adjustable straps and rubber non-skid floor end make installation flexible andf easy with no mounts or bases. Includes a heavy duty carrying case w/shoulder strap.
Height: 4.5
Width: 4.5
Length: 67
Weight: 13.5
HULL GARD® INFLATABLE VINYL FENDER (TAYLOR)
Oval-shaped design minimizes rolling motion and reduces hull rub. Molded-in eyelets withstand the constant pull and tug of everyday usage. Molded-in inflation valves allow you to customize the pressure for maximum effectiveness. Extra soft, tough and shiny. Valve seats are integrally molded into the fender, not glued in.
Height: 6.5
Width: 6.5
Length: 23
Weight: 2.5
OFFSHORE PRO SERIES™ MARINE COOLER (COLEMAN)
- Antimicrobial additive helps resist the growth of odor, mold and mildew
- Comfort grip over molded handles
- Stainless steel cable lid strap
- Tray cutting board also works as divider
- Rust proof stainless steel screws and hinges
3000003695/3694: 6 day ice retention. Rust proof leak resistant threaded channel drain with drain valve.
- UV inhibitors added to white cooler
- Antimicrobial liner resists odor, mildew and fungus
- Stainless steel screws and hinges
- Stainless steel cable lid strap to prevent hinge over-extension
- 1 tray and 1 divider
- Integrated fish ruler & cup holders molded into the lid
- No-crush comfort over-molded handles
- Hale?s Navy color accents on liner and handles
- Keeps the Ice!™ up to 6 days
- 3000003701 36 Qt. cooler keeps cold for up to 5 days
Height: 53
Width: 22.5
Length: 23.5
Weight: 46.950001
DOCK PRO™ INFLATABLE VINYL DOCK WHEEL (TAYLOR)
Rolls with impact to fend off boat. Same soft vinyl as in Taylor fenders. Extra heavy galvanized base with predrilled holes. 12″ and 18″ Wheels use large 2″ dia. axle housing for maximum strength. 3 year warranty.
Height: 12.5
Width: 8.5
Length: 15.75
Weight: 13.5
ANCHOR RODE (POWERWINCH)
Required for Powerwinch Free Fall anchor windlass. All rodes come with a tapered backsplice, premium 3 strand nylon line and Acco G4 hi-test chain.
Height: 15
Width: 14.5
Length: 14.75
Weight: 55
HULL GARD® INFLATABLE VINYL FENDER (TAYLOR)
Oval-shaped design minimizes rolling motion and reduces hull rub. Molded-in eyelets withstand the constant pull and tug of everyday usage. Molded-in inflation valves allow you to customize the pressure for maximum effectiveness. Extra soft, tough and shiny. Valve seats are integrally molded into the fender, not glued in.
Height: 8.5
Width: 8.5
Length: 27
Weight: 5.25
PERSONAL WATERCRAFT BUOY (TAYLOR)
Can be used to mark hazards, fishing spots, race course or as fenders. 8″ round. Made of same quality vinyl used in Taylor’s HullGard fenders.
Height: 10
Width: 8
Length: 8
Weight: 1.366
LED FLASHLIGHT CT-70F (COLEMAN)
- Tactical look and feel with crenulated bezel
- Electronic dimming, focusing bezel
- 3 modes: High. Low & Strobe
- Powered by 6AA Batteries
- Tactical look and feel with crenulated bezel
- Electronic dimming, focusing bezel
- 3 modes: High. Low & Strobe
Height: 12
Width: 2.37
Length: 5
Weight: 2.85
OFFSHORE PRO SERIES™ MARINE COOLER (COLEMAN)
- Insulation retains ice for six days in temperatures up to 90° F
- Antimicrobial additive helps resist the growth of odor, mold and mildew
- Built in UV inhibitor helps prevents yellowing
- Comfort grip over molded handles
- Stainless steel spring lid straps
- Tray cutting board also works as divider
- Rust proof stainless steel screws and hinges
- Rust proof leak resistant threaded channel drain with drain valve
- UV inhibitors added to white cooler
- Antimicrobial liner resists odor, mildew and fungus
- Stainless steel screws and hinges
- Stainless steel cable lid strap to prevent hinge over-extension
- 1 tray and 1 divider
- Integrated fish ruler & cup holders molded into the lid
- No-crush comfort over-molded handles
- Hale?s Navy color accents on liner and handles
- Keeps the Ice!™ up to 6 days
- 3000003701 36 Qt. cooler keeps cold for up to 5 days
Height: 36.900002
Width: 17
Length: 17.799999
Weight: 22
PIRATE HEAD FLAGS (TAYLOR)
Taylor 12″ x 18″ Pirate Girl Zombie Flag.
Height: 1.25
Width: 5
Length: 8
Weight: 0.92
SD3 STERN DRIVE INSTALLATION JACK (BROWNELL)
- Heavy Duty
- Adjusts on 3 axes to make stern drive removal and installation an easy one man job
- Pneumatic wheels
- Coated surfaces to prevent scratching
- Made in USA
- Heavy Duty
- Adjusts on 3 axes to make stern drive removal and installation an easy one man job
- Pneumatic wheels
- Coated surfaces to prevent scratching
- Made in USA
Height: 14
Width: 40
Length: 50
Weight: 165
TUFF END™ INFLATABLE VINYL BUOY (TAYLOR)
Tuff End fender ends are made from injection molded vinyl tested to 2000 psi tensile strength.
Features: large line holes that will accept standard shackles. The curved design hole prevents chafing.
Height: 27
Width: 27
Length: 34
Weight: 15.53
TUFF END™ INFLATABLE VINYL BUOY (TAYLOR)
Tuff End fender ends are made from injection molded vinyl tested to 2000 psi tensile strength. Features
large line holes that will accept standard shackles. The curved design hole prevents chafing.
Height: 39
Width: 34
Length: 34
Weight: 40
NOVELTY DESIGN FLAG (TAYLOR)
Perma-print nylon.
Height: 1.25
Width: 5
Length: 8
Weight: 0.92
THE SPOILER™ INFLATABLE LOW DRAG BUOYS (TAYLOR)
Everything about The Spoiler is carefully designed to give fishing operations optimal buoy performance over the long haul.
The Spoiler’s unique, more rounded shape produces greater buoyancy and lower drag when compared with other well known makes. Ribbed design also helps keep drag to an absolute minimum. Independent testing shows that The Spoiler has on average 82% less drag than conventional round buoys. Stable color formulation protects against sun and ensures buoy will never fade to white.
Height: 13
Width: 24
Length: 13
Weight: 5.53
AER-O-BUOY RING BUOY (TAYLOR)
CCG Approved
Tough polyethylene outer shell resists gas, oil and saltwater. Closed cell foam core for buoyancy. Grab line threading system allows for easy replacement.
Height: 4
Width: 30
Length: 30
Weight: 11.25
MOTOR BOAT STAND WITH TOP (BROWNELL BOAT STANDS)
Stackable and the most modern, inexpensive, safe method of shoring up boats. They are easily adjusted. Have angled iron tread plates to prevent damage to pavement. Full length center pipe on all sizes for stability and thread protection. All bases are totally submerged in paint to ensure full coverage inside and out.
Height: 63
Width: 19
Length: 19
Weight: 32
HULL GARD® INFLATABLE VINYL FENDER (TAYLOR)
Oval-shaped design minimizes rolling motion and reduces hull rub. Molded-in eyelets withstand the constant pull and tug of everyday usage. Molded-in inflation valves allow you to customize the pressure for maximum effectiveness. Extra soft, tough and shiny. Valve seats are integrally molded into the fender, not glued in.
Height: 6.5
Width: 6.5
Length: 23
Weight: 2.5
POST BUMPER (TAYLOR)
Great protection for pipe supported type docks. Molded from marine grade vinyl with an inflation valve to adjust firmness. Slides over 1-1/2″ dock pipe.
Height: 6
Width: 6
Length: 15
Weight: 4.166
OIL-FREE D-ICER™ (TAYLOR)
- Oil free design with no chance of oil leaks
- Polluting our environment
- More energy efficient than oil filled units and costs less to operate
- Molded glass filled nylon shroud guides water flow and blocks debris
- Stainless steel motor shaft and motor housing eliminates corrosion
- High efficiency motor and high performance propeller
- Standard 50′ field replaceable power cord
- Oil free design with no chance of oil leaks polluting our environment
- More energy efficient than oil filled units and costs less to operate
- Molded glass filled nylon shroud guides water flow and blocks debris
- Stainless steel motor shaft and motor housing eliminates corrosion
- High efficiency motor and high performance propeller
- Standard 50′ field replaceable power cord
Height: 14.4
Width: 14.5
Length: 15.5
Weight: 36
90 DEGREE VINYL CORNER BUMPER (TAYLOR)
This 90° corner (outside) will protect your boat from this critical point. Inside structural ribs provide the impact resistance you need while it’s flush fit side sections give your installation the “finished” appearance. Extrusions fit flush with 90° cut. Inside dimensions cover 6″ each side.
Height: 6
Width: 6
Length: 6
Weight: 1.333
DOCK FLOAT (TAYLOR)
Has seamless area and UV resistant black polyethylene shell filled with EPS foam. Outer shell resists impacts and protects foam center from saltwater, gasoline and most chemicals. Thick mounting flange can be drilled to accommodate attachment fasteners for easy mounting to any dock design. 8 year floatation warranty.
Height: 12
Width: 24
Length: 48
Weight: 30
4D LED WORKLIGHT SERIES WORKLIGHT (COLEMAN)
Powerful handheld worklight
Tough, polycarbonate lens
Thru-hole on work light for carabiner attachment
Pivoting head for multidirectional work light
Durable, rubberized bezel and base
Overmolded handle for comfortable grip
158 lumens of light output with 83 hours of runtime
Runs on 4D batteries (not included)
- Powerful handheld worklight
- Tough, polycarbonate lens
- Thru-hole on work light for carabiner attachment
- Pivoting head for multidirectional work light
- Durable, rubberized bezel and base
- Overmolded handle for comfortable grip
- 158 lumens of light output with 83 hours of runtime
- Runs on 4D batteries (not included)
Height: 13.25
Width: 4.5
Length: 8.63
Weight: 1.3
STORM GARD FENDERS (TAYLOR)
Our team of engineers has spent countless hours creating our patented True Color pearlescent-infused Storm Gard fenders. Pearlescent color mixes match the most popular colors used in today’s gelcoats and trim. Our patented color enhancement process provides deeper richer colors. Integrated color agents add luster in the sunlight. The ultimate finishing touch for your boat. Made in the USA. Lifetime Guarantee.
Height: 5
Width: 5
Length: 20
Weight: 1.7
STAINLESS STEEL FENDER RACK (TAYLOR)
A convenient place to stow fenders. Mounts on any rail and stanchion system. Movable J hooks accommodates 7/8″ rail and stanchion system, Tightens to blend with any angle. Cross-reinforced for extra strength. Holds any style fender.Holds “Big B” and “Hull Gard” fenders effectively. Folds flat for easy storage.
Height: 3
Width: 14
Length: 46
Weight: 1.68
PONTOON RAIL FENDER ADJUSTER (TAYLOR)
A fender adjuster designed specifically for the 1″ square tube rails of pontoon boats. The mounting structure clamps securely to square tubing yet can be repositioned quickly and easily. Made from quality marine grade components -simple height adjustment for lines up to 3/8″.
Height: 6
Width: 6.62
Length: 10
Weight: 1
HULL GARD® INFLATABLE VINYL FENDER (TAYLOR)
Oval-shaped design minimizes rolling motion and reduces hull rub. Molded-in eyelets withstand the constant pull and tug of everyday usage. Molded-in inflation valves allow you to customize the pressure for maximum effectiveness. Extra soft, tough and shiny. Valve seats are integrally molded into the fender, not glued in.
Height: 6.5
Width: 6.5
Length: 23
Weight: 2.5
LOW FREEBOARD FENDER (TAYLOR)
The first boat fender to address the needs of low freeboard boats. Shaped to protect the gunwales and rubrail. Offers superior protection compared to regular fenders against high docks. Low Freeboard fenders can be tied over the cleat to position it higher on the boat, putting protection where its needed. Made from specially formulated tough marine grade vinyl and features an inflation valve for air pressure adjestment.
Height: 5
Width: 5
Length: 15
Weight: 2
LOW FREEBOARD FENDER (TAYLOR)
The first boat fender to address the needs of low freeboard boats. Shaped to protect the gunwales and rubrail. Offers superior protection compared to regular fenders against high docks. Low Freeboard fenders can be tied over the cleat to position it higher on the boat, putting protection where its needed. Made from specially formulated tough marine grade vinyl and features an inflation valve for air pressure adjestment.
Height: 5
Width: 5
Length: 15
Weight: 2
MAST BUOY (TAYLOR)
Ideal for pick-up or diving applications, the 5/16″ fiberglass mast is coated with a PVC outer layer for strength, flexibility, and elimination of fiberglass shards. The urethane foam filled HDPE outer shell provides great flotation and years of service. The cast weight is also covered with HDPE so it will not scratch or mar your boat’s finish.
Height: 5
Width: 5
Length: 51
Weight: 2.666
4D LED WORKLIGHT SERIES FLASHLIGHT (COLEMAN)
LED flashlight with Cree Xlamp® XR-E LED
172 lumens of light output with 95 hours of runtime
Includes 4 D battery pack
Durable, rubberized bezel and base, wide handle
XPS Portable Energy Pack compatible
Dimensions: 7.2″ H x 7.6″ W x 4.6″ T
- LED flashlight with Cree Xlamp® XR-E LED
- 172 lumens of light output with 95 hours of runtime
- Includes 4 D battery pack
- Durable, rubberized bezel and base, wide handle
- XPS Portable Energy Pack compatible
- Dimensions: 7.2″ H x 7.6″ W x 4.6″ T
Height: 11
Width: 4.5
Length: 10
Weight: 1.5
TUFF END™ INFLATABLE VINYL BUOY (TAYLOR)
Tuff End fender ends are made from injection molded vinyl tested to 2000 psi tensile strength. Features
large line holes that will accept standard shackles. The curved design hole prevents chafing.
Height: 18
Width: 18
Length: 24
Weight: 8.284
TUFF END™ INFLATABLE VINYL FENDER (TAYLOR)
Tuff End™ fenders are for heavy duty marine applications. Constructed from the same flexible, resilient vinyl as our Super Gard, Big B, and Hull Gard fenders, the end in each Tuff End is injection molded for extra strength and reliability. Tuff Ends are designed to perform under the most demanding conditions. Tuff End™ fenders feature seamless construction, the strongest in the industry!
Height: 15
Width: 15
Length: 41
Weight: 13.7
NOVELTY DESIGN FLAG (TAYLOR)
Perma-print nylon.
Height: 1.25
Width: 5
Length: 8
Weight: 0.92
MODULAR FLAT FENDER (TAYLOR)
Made from closed cell EVA. These fenders will not puncture or absorb water. Their flat design keeps them from rolling or riding up. They can be fastened together with our hook and loop strap to create a modular system. Easy to store. Can also double as a knee pad or seat cushion.
Height: 2
Width: 8
Length: 20
Weight: 3
PONTOON GAZEBO (TAYLOR)
Top accommodates both 96″ and 102″ wide boats and extends out to 8 ft. of coverage. Constructed from Hot Shot™ marine grade polyester fabric, the top is strong yet light weight. It is supported by a shock-corded fiberglass pole framework that breaks down for easy storage. The large interior radius allows you to sit comfortably without bending over and provides excellent head room. Comes complete with shade top, frame, marine grade hardware and storage bag.
Height: 8
Width: 8
Length: 23
Weight: 9.4
TUFF END™ INFLATABLE VINYL FENDER (TAYLOR)
Tuff End™ fenders are for heavy duty marine applications. Constructed from the same flexible, resilient vinyl as our Super Gard, Big B, and Hull Gard fenders, the end in each Tuff End is injection molded for extra strength and reliability. Tuff Ends are designed to perform under the most demanding conditions. Tuff End™ fenders feature seamless construction, the strongest in the industry!
Height: 10
Width: 10
Length: 30
Weight: 6.7
BOAT COVER SUPPORT POLE BASE PAD (TAYLOR)
This new base is designed for use with all 7/8″ diameter (bottom pole) support poles. The bottom pad is made from EPDM to provide additional friction to hold pole in place against the deck versus the traditional crutch tip design. In addition, the base pad has a swivel capability that allows the pole to be positioned at just the right angle for your application. Simply remove the bottom tip from your existing support pole and insert over adapter to secure. (Pole not included)
Height: 5
Width: 1.5
Length: 22
Weight: 3.5
STRAP – CROSS WOVEN (SHRINKWRAP)
Used with uprights and buckles to form the support structure under shrinkwrap covers.
Height: 22.25
Width: 12
Length: 12
Weight: 16
POST BUMPER (TAYLOR)
Great protection for pipe supported type docks. Molded from marine grade vinyl with an inflation valve to adjust firmness. Slides over 1-1/2″ dock pipe.
Height: 6
Width: 6
Length: 15
Weight: 4.166
BIG B™ INFLATABLE VINYL FENDER (TAYLOR)
These fenders feature a tubular center for end-to-end line passage. Ribbed sides keep fenders in position and minimize roll. Built-in bi-valve allows you to inflate the fender to just the right pressure. Can be hung vertically or horizontally. Recommended inflation is 2 PSI. Extra soft, tough and shiny.
Height: 8
Width: 8
Length: 20
Weight: 3
THE SPOILER™ INFLATABLE LOW DRAG BUOYS (TAYLOR)
Everything about The Spoiler is carefully designed to give fishing operations optimal buoy performance over the long haul.
The Spoiler’s unique, more rounded shape produces greater buoyancy and lower drag when compared with other well known makes. Ribbed design also helps keep drag to an absolute minimum. Independent testing shows that The Spoiler has on average 82% less drag than conventional round buoys. Stable color formulation protects against sun and ensures buoy will never fade to white.
Height: 13
Width: 24
Length: 13
Weight: 5.53
ECO BLAST RECHARGEABLE AIR HORN (TAYLOR)
A refill valve to permit recharging using any bicycle pump, service station air pump or air compressor in seconds. Operates in all weather and extreme temperatures, works in any position and leaves no rust rings on surfaces. Emits a powerful 120 dB signal that meets all USCG Requirements.
#617 Mini Air pump: Use it to quickly refill your EcoBlast rechargeabel signal air horn. Or use it to inflate fenders, bike tires, rafts, toys and more. Comes with 2 interchangeable valves.
Height: 1.5
Width: 10.25
Length: 11
Weight: 0.966
STAINLESS STEEL FENDER RACK (TAYLOR)
A convenient place to stow fenders. Mounts on any rail and stanchion system. Movable J hooks accommodates 7/8″ rail and stanchion system, Tightens to blend with any angle. Cross-reinforced for extra strength. Holds any style fender.Holds “Big B” and “Hull Gard” fenders effectively. Folds flat for easy storage.
Height: 1.5
Width: 16
Length: 32
Weight: 1.2
SAILBOAT STAND WITH TOP (BROWNELL BOAT STANDS)
Nestable and the most modern, inexpensive, safe method of shoring up boats. They are easily adjusted. Constructed of steel tubing for highest quality and strength. All bases are totally submerged in paint to ensure full coverage inside and out.
Height: 26
Width: 27
Length: 24
Weight: 30
HULL GARD® INFLATABLE VINYL FENDER (TAYLOR)
Oval-shaped design minimizes rolling motion and reduces hull rub. Molded-in eyelets withstand the constant pull and tug of everyday usage. Molded-in inflation valves allow you to customize the pressure for maximum effectiveness. Extra soft, tough and shiny. Valve seats are integrally molded into the fender, not glued in.
Height: 5.5
Width: 5.5
Length: 20
Weight: 2
DOCK PRO™ PREMIUM SIDE GARD (TAYLOR)
Heavy duty double molded vinyl profile. Gives extra durability and protection dockside. Installs easily with screws or nails.
Height: 2.25
Width: 4.5
Length: 120
Weight: 13.7
PERSONAL WATERCRAFT BUOY (TAYLOR)
Can be used to mark hazards, fishing spots, race course or as fenders. 8″ round. Made of same quality vinyl used in Taylor’s HullGard fenders.
Height: 10
Width: 8
Length: 8
Weight: 1.366
THE SPOILER™ INFLATABLE LOW DRAG BUOYS (TAYLOR)
Everything about The Spoiler is carefully designed to give fishing operations optimal buoy performance over the long haul.
The Spoiler’s unique, more rounded shape produces greater buoyancy and lower drag when compared with other well known makes. Ribbed design also helps keep drag to an absolute minimum. Independent testing shows that The Spoiler has on average 82% less drag than conventional round buoys. Stable color formulation protects against sun and ensures buoy will never fade to white.
Height: 13
Width: 24
Length: 13
Weight: 5.53
HULL GARD® INFLATABLE VINYL FENDER (TAYLOR)
Oval-shaped design minimizes rolling motion and reduces hull rub. Molded-in eyelets withstand the constant pull and tug of everyday usage. Molded-in inflation valves allow you to customize the pressure for maximum effectiveness. Extra soft, tough and shiny. Valve seats are integrally molded into the fender, not glued in.
Height: 6.5
Width: 6.5
Length: 23
Weight: 2.5
ANCHORSHADE III (TAYLOR)
This uniquely designed 6′ x 6′ square, UV treated nylon umbrella can be used on almost any vessel from a small fishing boat to larger high performance boats. It is designed to be used when anchored or at idle speed on a calm day. AnchorShade® III offers improved design features such as stronger, larger diameter solid fiberglass structural ribs and hinge connectors. The aluminum frame is powder coated and has a 4 point locking height up to 8 feet. Adjustable straps and rubber non-skid floor end make installation flexible andf easy with no mounts or bases. Includes a heavy duty carrying case w/shoulder strap.
Height: 4.5
Width: 4.5
Length: 67
Weight: 13.5
STORM GARD FENDERS (TAYLOR)
Our team of engineers has spent countless hours creating our patented True Color pearlescent-infused Storm Gard fenders. Pearlescent color mixes match the most popular colors used in today’s gelcoats and trim. Our patented color enhancement process provides deeper richer colors. Integrated color agents add luster in the sunlight. The ultimate finishing touch for your boat. Made in the USA. Lifetime Guarantee.
Height: 8
Width: 8
Length: 26
Weight: 4.2
POST BUMPER (TAYLOR)
Great protection for pipe supported type docks. Molded from marine grade vinyl with an inflation valve to adjust firmness. Slides over 1-1/2″ dock pipe.
Height: 6
Width: 6
Length: 15
Weight: 4.166
ADJUSTABLE BOAT COVER SUPPORT POLE (GARELICK)
Support your boat cover canvas with this telescoping support pole with a rubber base. Anodized aluminum helps prevent salt water corrosion and weathering. Quick lock fitting for fast, easy adjustment.
Height: 37.25
Width: 3.25
Length: 4.75
Weight: 1
PWC FENDER (TAYLOR)
Designed to custom fit the profile of most PWCs. The fender bottom is shaped to “hook” under the bond flange for quick attachment. Flex areas on the fender provide a “hinge” action that allows the fender to conform to the shape of the watercraft. Features an inflation valve for air pressure adjustment and includes a suction cup and securing line.
Height: 9
Width: 3.5
Length: 9
Weight: 1.833
CLOTHES CLAW™ BOATERS’ CLOTHES PINS (TAYLOR)
Made from high quality plastic molded with UV inhibitors. Features incredible holding power, unaffected by saltwater and it floats.
Height: 4
Width: 8
Length: 8
Weight: 1.25
THE SPOILER™ INFLATABLE LOW DRAG BUOYS (TAYLOR)
Everything about The Spoiler is carefully designed to give fishing operations optimal buoy performance over the long haul.
The Spoiler’s unique, more rounded shape produces greater buoyancy and lower drag when compared with other well known makes. Ribbed design also helps keep drag to an absolute minimum. Independent testing shows that The Spoiler has on average 82% less drag than conventional round buoys. Stable color formulation protects against sun and ensures buoy will never fade to white.
Height: 10.5
Width: 18
Length: 10.5
Weight: 3.33
HULL GARD® INFLATABLE VINYL FENDER (TAYLOR)
Oval-shaped design minimizes rolling motion and reduces hull rub. Molded-in eyelets withstand the constant pull and tug of everyday usage. Molded-in inflation valves allow you to customize the pressure for maximum effectiveness. Extra soft, tough and shiny. Valve seats are integrally molded into the fender, not glued in.
Height: 5.5
Width: 5.5
Length: 20
Weight: 2
HULL GARD® INFLATABLE VINYL FENDER (TAYLOR)
Oval-shaped design minimizes rolling motion and reduces hull rub. Molded-in eyelets withstand the constant pull and tug of everyday usage. Molded-in inflation valves allow you to customize the pressure for maximum effectiveness. Extra soft, tough and shiny. Valve seats are integrally molded into the fender, not glued in.
Height: 5.5
Width: 5.5
Length: 20
Weight: 2
PILING GUARD (TAYLOR)
Designed for both heavy-duty and standard impact situations – especially for fuel docks, high impact areas and protection against large watercrafts
- Contains over 25% more material when compared to other edging in the market
- Curved base conforms to piling for snug, long-lasting installation
- Can be mounted on flat surfaces
- UV stabilized gray, non marking material
NOTE: Pre-drilling holes in Piling Guards is required.
8 foot lengths – Start 3″ from each end and drill holes 15″ on center*. Once pre-drilled holes are placed, install edging using stainless steel 3/8″ x 2″ (for piling guard) and 1/2″ x 4″ (for omega piling guard) long lag screws backed with a square washer.
Non-scuffing heavy duty profiles absorb impact from any direction and stay put, protecting boats, pilings and reputations.
- Designed for both heavy-duty and standard impact situations – especially for fuel docks, high impact areas and protection against large watercraft
- Curved base conforms to piling for snug, long-lasting installation
- Can also be mounted on flat surfaces
- UV stabilized gray, non-marking material
- NOTE: Pre-drilling holes in Piling Guards is required
Height: 4.25
Width: 6.25
Length: 96
Weight: 41
PIRATE HEAD FLAGS (TAYLOR)
Taylor 12″ x 18″ Pirate Flag.
Height: 1.25
Width: 5
Length: 8
Weight: 0.92
LIFE RING BUOY (TAYLOR)
Inspected and tested in accordance with U. S. Coast Guard regulations. Rings contain unicellular polyurethane foam for buoyancy. Molded-in becket design means there are no straps to wear, mildew, or deteriorate.
Vinyl coated foam.
Height: 3.5
Width: 20
Length: 20
Weight: 3.666
BUOY HARDWARE (TAYLOR)
1/2″ diameter hot-dipped galvanized rod with 4″ long swivel, 2 galvanized washers and nylon care lock nut.
Height: 0.5
Width: 3.5
Length: 17.5
Weight: 2.12
TUFF END™ INFLATABLE VINYL BUOY (TAYLOR)
Tuff End fender ends are made from injection molded vinyl tested to 2000 psi tensile strength.
Features: large line holes that will accept standard shackles. The curved design hole prevents chafing.
Height: 12
Width: 12
Length: 17
Weight: 3.302
STORM GARD FENDERS (TAYLOR)
Our team of engineers has spent countless hours creating our patented True Color pearlescent-infused Storm Gard fenders. Pearlescent color mixes match the most popular colors used in today’s gelcoats and trim. Our patented color enhancement process provides deeper richer colors. Integrated color agents add luster in the sunlight. The ultimate finishing touch for your boat. Made in the USA. Lifetime Guarantee.
Height: 5
Width: 5
Length: 20
Weight: 1.7
TUFF END™ INFLATABLE VINYL FENDER (TAYLOR)
Solid vinyl ends for extra strength. Dual purpose bivalve construction. Inflate with hand pump and football-type pin or simply remove screw-in tri-valve and use foot pump or similar high pressure device. Removal also allows rapid deflation. Recommended inflation is 2 PSI. High performance and looks great.
Height: 12
Width: 12
Length: 35
Weight: 7.62
DOCK PRO™ INFLATABLE VINYL DOCK WHEEL (TAYLOR)
Rolls with impact to fend off boat. Same soft vinyl as in Taylor fenders. Extra heavy galvanized base with predrilled holes. 12″ and 18″ Wheels use large 2″ dia. axle housing for maximum strength. 3 year warranty.
Height: 8
Width: 8
Length: 8
Weight: 4.65
MOTOR BOAT STAND WITH TOP (BROWNELL BOAT STANDS)
Stackable and the most modern, inexpensive, safe method of shoring up boats. They are easily adjusted. Have angled iron tread plates to prevent damage to pavement. Full length center pipe on all sizes for stability and thread protection. All bases are totally submerged in paint to ensure full coverage inside and out.
Height: 29
Width: 20
Length: 20
Weight: 21
PONTOON RAIL FENDER ADJUSTER (TAYLOR)
A fender adjuster designed specifically for the 1″ square tube rails of pontoon boats. The mounting structure clamps securely to square tubing yet can be repositioned quickly and easily. Made from quality marine grade components -simple height adjustment for lines up to 3/8″.
Height: 1.75
Width: 8
Length: 8
Weight: 2.666
HULL GARD® INFLATABLE VINYL FENDER (TAYLOR)
Oval-shaped design minimizes rolling motion and reduces hull rub. Molded-in eyelets withstand the constant pull and tug of everyday usage. Molded-in inflation valves allow you to customize the pressure for maximum effectiveness. Extra soft, tough and shiny. Valve seats are integrally molded into the fender, not glued in.
Height: 6.5
Width: 6.5
Length: 23
Weight: 2.5
BIMINI SUPPORT POLES (TAYLOR)
Keep your bimini top off the gunwales with a pair of bimini support poles. These poles replace your rear straps and keep your top “up and out of the way.” Two jaw slides (7/8″) and deck hinge are included. 1 Pair per card.
Note:These poles should never be used to replace the front support straps. Only the rear straps should be replaced with adjustable support poles. Do not exceed 35 miles per hour while using adjustable Bimini top support poles.
Height: 2.25
Width: 4
Length: 40
Weight: 3.858
LIFE RING BUOY (TAYLOR)
Contain unicellular polyurethane foam. Features floating polypropylene grab lines with UV Stabilizers, secured inside the foam core. Molded-in becket design means there are no straps to wear, mildew or deteriorate. Choice of vinyl or hard shell polyethylene skin. All rings meet USCG Commercial approval. SOLAS approved models equipped with reflective tape. Min. buoyancy 16-1/2 lbs.
Height: 3
Width: 24
Length: 24
Weight: 5.166
THE SPOILER™ INFLATABLE LOW DRAG BUOYS (TAYLOR)
Everything about The Spoiler is carefully designed to give fishing operations optimal buoy performance over the long haul.
The Spoiler’s unique, more rounded shape produces greater buoyancy and lower drag when compared with other well known makes. Ribbed design also helps keep drag to an absolute minimum. Independent testing shows that The Spoiler has on average 82% less drag than conventional round buoys. Stable color formulation protects against sun and ensures buoy will never fade to white.
Height: 13
Width: 24
Length: 13
Weight: 5.53
FENDER CUSHION™ (TAYLOR)
Designed to protect your boat and stay in place while rafting together. Extensively on-water tested. Features 6 molded-in lateral tubes for superior crush resistance, exclusive channel design to prevent pop-out and assure positive locking action along boats’ rub rails, and 2 integral lengthwise tubes to allow more cushions to be tied together for a soft rafting board. Hangs vertically or horizontally. Ideal for tying to piling. Comfortable for sitting. Height allows view over windshield. Never to be used as a life saving device.
Height: 15.5
Width: 6.25
Length: 15.25
Weight: 6.1
PONTOON FENDER (TAYLOR)
Specifically designed for the needs of pontoon boaters. Fenders are made from marine grade, UV resistant vinyl and have an integrated rubber football style valve. The fence saver secures to the fence or railing and is designed to prevent contact to the delicate aluminum fencing.
Height: 36
Width: 5
Length: 9
Weight: 3.5
HARD SKIN SUR-MOOR™ MOORING BUOY (TAYLOR)
Puncture proof and almost indestructible buoys features hot-dipped galvanized steel mounting hardware. Blue reflective stripe for nighttime visibility. Sandblasted finish. 3-Year flotation warranty on all Taylor hard skin buoys.
Height: 15.12
Width: 15
Length: 15
Weight: 8.75
STORM GARD FENDERS (TAYLOR)
Our team of engineers has spent countless hours creating our patented True Color pearlescent-infused Storm Gard fenders. Pearlescent color mixes match the most popular colors used in today’s gelcoats and trim. Our patented color enhancement process provides deeper richer colors. Integrated color agents add luster in the sunlight. The ultimate finishing touch for your boat. Made in the USA. Lifetime Guarantee.
Height: 6
Width: 6
Length: 23
Weight: 2.2
POST BUMPER (TAYLOR)
Great protection for pipe supported type docks. Molded from marine grade vinyl with an inflation valve to adjust firmness. Slides over 1-1/2″ dock pipe.
Height: 6
Width: 6
Length: 15
Weight: 4.166
HULL GARD® INFLATABLE VINYL FENDER (TAYLOR)
Oval-shaped design minimizes rolling motion and reduces hull rub. Molded-in eyelets withstand the constant pull and tug of everyday usage. Molded-in inflation valves allow you to customize the pressure for maximum effectiveness. Extra soft, tough and shiny. Valve seats are integrally molded into the fender, not glued in.
Height: 10.5
Width: 10.5
Length: 30
Weight: 5.19
MAST BUOY (TAYLOR)
Ideal for pick-up or diving applications, the 5/16″ fiberglass mast is coated with a PVC outer layer for strength, flexibility, and elimination of fiberglass shards. The urethane foam filled HDPE outer shell provides great flotation and years of service. The cast weight is also covered with HDPE so it will not scratch or mar your boat’s finish.
Height: 6
Width: 6
Length: 77.5
Weight: 3
DOCK PRO™ PREMIUM SIDE GARD (TAYLOR)
Heavy duty double molded vinyl profile. Gives extra durability and protection dockside. Installs easily with screws or nails.
Height: 4.5
Width: 25
Length: 24
Weight: 14
DIVIDE™ LED FLASHLIGHT WITH BATTERY LOCK (COLEMAN)
Exclusive BatteryLock™ system eliminates battery drain and corrosion.
Height: 12
Width: 5
Length: 2.5
Weight: 2.85
PONTOON DOLLY (BROWNELL BOAT STANDS)
4″ phenolic casters
Foam padded top for maximum protection
2,000 lb. capacity
- 4″ phenolic casters
- Foam padded top for maximum protection
- 2,000 lb. capacity
Height: 9
Width: 38
Length: 39
Weight: 65
PERSONAL WATERCRAFT BUOY (TAYLOR)
Can be used to mark hazards, fishing spots, race course or as fenders. 8″ round. Made of same quality vinyl used in Taylor’s HullGard fenders.
Height: 10
Width: 8
Length: 8
Weight: 1.366
ESKY® MARINE COOLERS (COLEMAN)
- Built in tie down points
- Exoskeletion scratch resistant texture on high impact areas
- Heavy-Duty rubber latches
- Integrated large knuckle hinges
- Padlock attachment for lock tight security
- Non-skid feet
- Built in tie down points
- Exoskeletion scratch resistant texture on high impact areas
- Heavy-Duty rubber latches
- Integrated large knuckle hinges
- Padlock attachment for lock tight security
- Non-skid feet
Height: 22.129999
Width: 19.809999
Length: 33.130001
Weight: 42
Coleman BBQ Parts & Accessories
Accessories:
Grill Cover: Versatile heavy-duty PVC coated material resists cracking and fading. Full-length cover shields grill from the elements. Adjustable straps secure cover in windy conditions.
Wheeled Carry Case: Heavy-duty construction with easy-glide wheels for portability.
Griddle: Heavy-duty, porcelain-coated, cast-iron contruction is easy to clean and durable. Approximately 12″ x 12″ and weighs 7 lbs.
Iron Grate: Porcelain-coated, cast-iron materials ensure a long life for the product.
Pot Support: Durable, chrome-plated, steel wire construction. Perfect for simmering sauces, cooking soups or boiling vegetables for any meal.
Height: 9.3
Width: 7.05
Length: 19.700001
Weight: 8.3
STOW ‘N GO DOCK & PATIO STORAGE BOX (TAYLOR)
A durable polyethylene box that’s perfect for your dock, pool or patio. These boxes are manufactured with the highest quality U V-resistant polyethylene resin and is 100% maintenance-free. The double-walled lid is secured with a stainless latch, creating a weather proof design to ensure your contents remain protected and dry.
Height: 24
Width: 26
Length: 44
Weight: 33
KEEL STAND WITH TOP (BROWNELL BOAT STANDS)
Use Brownell Keel Stands in place of conventional wood blocks. Use one keel stand for each 10,000 pounds of vessel weight, spaced evenly along the keel. Always use a minimum of two keel stands. Boats should be stored on a flat, even surface. On softer surfaces, a wash plate is recommended under the base of each keel stand. Use Brownell Boat Stands to stabilize the vessel. Stackable for efficient storage Made in the U.S.A. with domestic steel.
Height: 16
Width: 11
Length: 11
Weight: 22
AUTO-ON LED COOLER LIGHT (COLEMAN)
Compatible with any cooler
5 bright white LED’s automatically turn on when the cooler lid is opened
Automatically turns off after 10 seconds of no motion detection
Mount with adhesive strip or self-tapping screws (included)
Waterproof to a depth of 1 meter
Easily removable for cleaning
- Compatible with any cooler
- 5 bright white LED’s automatically turn on when the cooler lid is opened
- Automatically turns off after 10 seconds of no motion detection
- Mount with adhesive strip or self-tapping screws (included)
- Waterproof to a depth of 1 meter
- Easily removable for cleaning
Height: 11
Width: 1.5
Length: 5
Weight: 0.9
SEAT SUPPORT SWING LEG (GARELICK)
Provides support for fold-down seating. Can be cut to length for desired height. Locks in down or storage position. 1″ diameter stainless leg with White, no mar poly tip, stainless button lock and mounting bracket.
Height: 4
Width: 4
Length: 14
Weight: 1
LED FLASHLIGHT CT-30F (COLEMAN)
- Tactical look and feel with crenulated bezel
- Electronic dimming, focusing bezel
- 3 modes: High, Low & Strobe
- Powered by 3AAA Batteries
- Tactical look and feel with crenulated bezel
- Electronic dimming, focusing bezel
- 3 modes: High, Low & Strobe
Height: 8
Width: 3.81
Length: 2
Weight: 2.85
TROLLING MOTOR PROP PROTECTOR (TAYLOR)
Extend the life of your boat cover by protecting it from wear and tear caused by sharp edges on your trolling motor prop. Made from heavy duty marine-grade vinyl. Protect your cover from prop blade wear.
Height: 1
Width: 10.2
Length: 10.2
Weight: 0.95
STORM GARD FENDERS (TAYLOR)
Our team of engineers has spent countless hours creating our patented True Color pearlescent-infused Storm Gard fenders. Pearlescent color mixes match the most popular colors used in today’s gelcoats and trim. Our patented color enhancement process provides deeper richer colors. Integrated color agents add luster in the sunlight. The ultimate finishing touch for your boat. Made in the USA. Lifetime Guarantee.
Height: 6
Width: 6
Length: 23
Weight: 2.2
TUFF END™ INFLATABLE VINYL FENDER (TAYLOR)
Tuff End™ fenders are for heavy duty marine applications. Constructed from the same flexible, resilient vinyl as our Super Gard, Big B, and Hull Gard fenders, the end in each Tuff End is injection molded for extra strength and reliability. Tuff Ends are designed to perform under the most demanding conditions. Tuff End™ fenders feature seamless construction, the strongest in the industry!
Height: 32
Width: 32
Length: 77
Weight: 67.199997
GALVANIZED BOAT STANDS WITH TOP (BROWNELL BOAT STANDS)
Nestable and the most modern, inexpensive, safe method of shoring up boats. They are easily adjusted. Hot dipped galvanized finished. All bases are totally hot dip galvanized to ensure full coverage inside and out.
Height: 31
Width: 37
Length: 37
Weight: 23
DOCK PRO™ MEDIUM EDGE GARD (TAYLOR)
Double molded vinyl dock edging is molded twice then molecularly bonded for extra durability and protection. A tough inner core is surrounded with our soft white vinyl for extra cushion against tough docks. Each piece installs easily to the edges of dock piers or floats with screws or nails.
Height: 2
Width: 4
Length: 120
Weight: 7.6
ELECTRIC WINCH (POWERWINCH)
Power-in, free-wheel out. Electric 12V cable winch with adjustable clutch. Switch and 25′ lanyard cord. Rugged ABS weather-resistant housing. Positive lock prevents unwanted strap slippage. Color coded 30 amp wiring harness for easy connection to the vehicle’s battery.
Model 215: One year limited warranty.
Model 315: two year limited warranty.
Height: 10.31
Width: 8.06
Length: 14.25
Weight: 24
BIG B™ INFLATABLE VINYL FENDER (TAYLOR)
These fenders feature a tubular center for end-to-end line passage. Ribbed sides keep fenders in position and minimize roll. Built-in bi-valve allows you to inflate the fender to just the right pressure. Can be hung vertically or horizontally. Recommended inflation is 2 PSI. Extra soft, tough and shiny.
Height: 8
Width: 8
Length: 20
Weight: 3
ANCHORSHADE III (TAYLOR)
This uniquely designed 6′ x 6′ square, UV treated nylon umbrella can be used on almost any vessel from a small fishing boat to larger high performance boats. It is designed to be used when anchored or at idle speed on a calm day. AnchorShade® III offers improved design features such as stronger, larger diameter solid fiberglass structural ribs and hinge connectors. The aluminum frame is powder coated and has a 4 point locking height up to 8 feet. Adjustable straps and rubber non-skid floor end make installation flexible andf easy with no mounts or bases. Includes a heavy duty carrying case w/shoulder strap.
Height: 4.5
Width: 4.5
Length: 67
Weight: 13.5
OUTDOOR SOFT COOLERS (COLEMAN)
Soft coolers that won’t collapse under pressure
- Removable hard liner to use with or without ice
- Heat-welded seams prevent leaks
- Front zippered pocket
Height: 19.879999
Width: 11.14
Length: 12.51
Weight: 2.635
THE SPOILER™ INFLATABLE LOW DRAG BUOYS (TAYLOR)
Everything about The Spoiler is carefully designed to give fishing operations optimal buoy performance over the long haul.
The Spoiler’s unique, more rounded shape produces greater buoyancy and lower drag when compared with other well known makes. Ribbed design also helps keep drag to an absolute minimum. Independent testing shows that The Spoiler has on average 82% less drag than conventional round buoys. Stable color formulation protects against sun and ensures buoy will never fade to white.
Height: 10.5
Width: 18
Length: 10.5
Weight: 3.33
SUR-MOOR™ T3C™ BUOY (TAYLOR)
Hard skin mooring buoys have a seamless and tough, one-piece polyethylene shell. Hard skin shells feature ultraviolet light absorbers for long-term life under the sun. Filled with EPS foam to positively displace water. Tube-through-the-center design. Three-Year Flotation warranty. Textured finish to enhance paint adhesion.
- The “ET” models have:
- Extended tube is 2.5″ high off the top of the ball
- Extended tube is reinforced with secondary schedule 40 (double thickness) and rolled over for extra strength
- Tube is drilled with a 21/64″ hole 3/4″ down from top to easily secure chain if desired
Height: 24.120001
Width: 24
Length: 24
Weight: 20.25
HULL GARD® INFLATABLE VINYL FENDER (TAYLOR)
Oval-shaped design minimizes rolling motion and reduces hull rub. Molded-in eyelets withstand the constant pull and tug of everyday usage. Molded-in inflation valves allow you to customize the pressure for maximum effectiveness. Extra soft, tough and shiny. Valve seats are integrally molded into the fender, not glued in.
Height: 10.5
Width: 10.5
Length: 30
Weight: 9
POST BUMPER (TAYLOR)
Great protection for pipe supported type docks. Molded from marine grade vinyl with an inflation valve to adjust firmness. Slides over 1-1/2″ dock pipe.
Height: 6
Width: 6
Length: 15
Weight: 4.166
STORM GARD FENDERS (TAYLOR)
Our team of engineers has spent countless hours creating our patented True Color pearlescent-infused Storm Gard fenders. Pearlescent color mixes match the most popular colors used in today’s gelcoats and trim. Our patented color enhancement process provides deeper richer colors. Integrated color agents add luster in the sunlight. The ultimate finishing touch for your boat. Made in the USA. Lifetime Guarantee.
Height: 5
Width: 5
Length: 20
Weight: 1.7
THE SPOILER™ INFLATABLE LOW DRAG BUOYS (TAYLOR)
Everything about The Spoiler is carefully designed to give fishing operations optimal buoy performance over the long haul.
The Spoiler’s unique, more rounded shape produces greater buoyancy and lower drag when compared with other well known makes. Ribbed design also helps keep drag to an absolute minimum. Independent testing shows that The Spoiler has on average 82% less drag than conventional round buoys. Stable color formulation protects against sun and ensures buoy will never fade to white.
Height: 13
Width: 24
Length: 13
Weight: 5.53
DOCK PRO™ PREMIUM SIDE GARD (TAYLOR)
Heavy duty double molded vinyl profile. Gives extra durability and protection dockside. Installs easily with screws or nails.
Height: 4.5
Width: 25
Length: 24
Weight: 14
DOCK PRO™ C-SHAPE GARD (TAYLOR)
Double molded vinyl dock edging is molded twice then molecularly bonded for extra durability and protection. A tough inner core is surrounded with our soft white vinyl for extra cushion against tough docks. Each piece installs easily to the edges of dock piers or floats with screws or nails.
Height: 3.5
Width: 15
Length: 15
Weight: 7.1
DOCK PRO™ MEDIUM EDGE GARD (TAYLOR)
Double molded vinyl dock edging is molded twice then molecularly bonded for extra durability and protection. A tough inner core is surrounded with our soft white vinyl for extra cushion against tough docks. Each piece installs easily to the edges of dock piers or floats with screws or nails.
Height: 6
Width: 24
Length: 24
Weight: 18.75
DOCK PRO™ INFLATABLE VINYL DOCK WHEEL (TAYLOR)
Rolls with impact to fend off boat. Same soft vinyl as in Taylor fenders. Extra heavy galvanized base with predrilled holes. 12″ and 18″ Wheels use large 2″ dia. axle housing for maximum strength. 3 year warranty.
Height: 16
Width: 16
Length: 16
Weight: 16.5
UNIVERSAL T-TOP CONSOLE COVERS (TAYLOR)
Trailerable T-Top console cover is secured to the underside of the fixed T-Top structure and will enclose any size console, helm seat and T-top support combination with a maximum base perimeter (at the deck) of 18′ or less. 48″ W x 60″ L x 66″ H.
Height: 4
Width: 16
Length: 17.5
Weight: 3
POLE PLUG (POWERWINCH)
Height: 8
Width: 4.5
Length: 10.25
Weight: 1
BIG B™ INFLATABLE VINYL FENDER (TAYLOR)
These fenders feature a tubular center for end-to-end line passage. Ribbed sides keep fenders in position and minimize roll. Built-in bi-valve allows you to inflate the fender to just the right pressure. Can be hung vertically or horizontally. Recommended inflation is 2 PSI. Extra soft, tough and shiny.
Height: 8
Width: 8
Length: 20
Weight: 3
THE SPOILER™ INFLATABLE LOW DRAG BUOYS (TAYLOR)
Everything about The Spoiler is carefully designed to give fishing operations optimal buoy performance over the long haul.
The Spoiler’s unique, more rounded shape produces greater buoyancy and lower drag when compared with other well known makes. Ribbed design also helps keep drag to an absolute minimum. Independent testing shows that The Spoiler has on average 82% less drag than conventional round buoys. Stable color formulation protects against sun and ensures buoy will never fade to white.
Height: 10.5
Width: 18
Length: 10.5
Weight: 3.33
THE SPOILER™ INFLATABLE LOW DRAG BUOYS (TAYLOR)
Everything about The Spoiler is carefully designed to give fishing operations optimal buoy performance over the long haul.
The Spoiler’s unique, more rounded shape produces greater buoyancy and lower drag when compared with other well known makes. Ribbed design also helps keep drag to an absolute minimum. Independent testing shows that The Spoiler has on average 82% less drag than conventional round buoys. Stable color formulation protects against sun and ensures buoy will never fade to white.
Height: 10.5
Width: 18
Length: 10.5
Weight: 3.33
POST BUMPER (TAYLOR)
Great protection for pipe supported type docks. Molded from marine grade vinyl with an inflation valve to adjust firmness. Slides over 1-1/2″ dock pipe.
Height: 6
Width: 6
Length: 15
Weight: 4.166
POST BUMPER (TAYLOR)
Great protection for pipe supported type docks. Molded from marine grade vinyl with an inflation valve to adjust firmness. Slides over 1-1/2″ dock pipe.
Height: 6
Width: 6
Length: 15
Weight: 4.166
POST BUMPER (TAYLOR)
Great protection for pipe supported type docks. Molded from marine grade vinyl with an inflation valve to adjust firmness. Slides over 1-1/2″ dock pipe.
Height: 6
Width: 6
Length: 15
Weight: 4.166
NOVELTY DESIGN FLAG (TAYLOR)
Perma-print nylon.
Height: 1.25
Width: 5
Length: 8
Weight: 0.92
LOW FREEBOARD FENDER (TAYLOR)
The first boat fender to address the needs of low freeboard boats. Shaped to protect the gunwales and rubrail. Offers superior protection compared to regular fenders against high docks. Low Freeboard fenders can be tied over the cleat to position it higher on the boat, putting protection where its needed. Made from specially formulated tough marine grade vinyl and features an inflation valve for air pressure adjestment.
Height: 7.5
Width: 7
Length: 25
Weight: 3.74
THE SPOILER™ INFLATABLE LOW DRAG BUOYS (TAYLOR)
Everything about The Spoiler is carefully designed to give fishing operations optimal buoy performance over the long haul.
The Spoiler’s unique, more rounded shape produces greater buoyancy and lower drag when compared with other well known makes. Ribbed design also helps keep drag to an absolute minimum. Independent testing shows that The Spoiler has on average 82% less drag than conventional round buoys. Stable color formulation protects against sun and ensures buoy will never fade to white.
Height: 13
Width: 24
Length: 13
Weight: 5.53
HARD SKIN SUR-MOOR™ MOORING BUOY (TAYLOR)
Puncture proof and almost indestructible buoys features hot-dipped galvanized steel mounting hardware. Blue reflective stripe for nighttime visibility. Sandblasted finish. 3-Year flotation warranty on all Taylor hard skin buoys.
Height: 18.120001
Width: 18
Length: 18
Weight: 11.4
TUFF END™ INFLATABLE VINYL FENDER (TAYLOR)
Solid vinyl ends for extra strength. Dual purpose bivalve construction. Inflate with hand pump and football-type pin or simply remove screw-in tri-valve and use foot pump or similar high pressure device. Removal also allows rapid deflation. Recommended inflation is 2 PSI. High performance and looks great.
Height: 19
Width: 19
Length: 50
Weight: 23.200001
ACTIVE SEAT SUSPENSION SYSTEM (GARELICK)
Provides boaters with a smoother ride in all types of weather and water conditions. Absorb and minimize up to 75% of the shock, jolt and vibration transmitted to the passenger. Corrosive resistant and UV stable. Standard bolt hole pattern allows for mounting on top of pedestal and beneath any individual seat. Features heavy duty forward hinge system allowing shock absorption to occur in the vertical plane only, eliminating unnecessary side sway and tipping. Includes provisions for mounting seats with 6″ center hole pattern. Rugged, high tensile anodized aluminum and stainless steel hardware construction. Compatible with all Garelick pedestal seat bases.
For use with wider bench seats – 1/2 profile. Sold in pairs.
Height: 2.25
Width: 7.56
Length: 13
Weight: 5.25
SUR-MOOR™ T3C™ BUOY (TAYLOR)
Hard skin mooring buoys have a seamless and tough, one-piece polyethylene shell. Hard skin shells feature ultraviolet light absorbers for long-term life under the sun. Filled with EPS foam to positively displace water. Tube-through-the-center design. Three-Year Flotation warranty. Textured finish to enhance paint adhesion.
- The “ET” models have:
- Extended tube is 2.5″ high off the top of the ball
- Extended tube is reinforced with secondary schedule 40 (double thickness) and rolled over for extra strength
- Tube is drilled with a 21/64″ hole 3/4″ down from top to easily secure chain if desired
Height: 15.12
Width: 15
Length: 15
Weight: 6.75
ANCHORSHADE III (TAYLOR)
This uniquely designed 6′ x 6′ square, UV treated nylon umbrella can be used on almost any vessel from a small fishing boat to larger high performance boats. It is designed to be used when anchored or at idle speed on a calm day. AnchorShade® III offers improved design features such as stronger, larger diameter solid fiberglass structural ribs and hinge connectors. The aluminum frame is powder coated and has a 4 point locking height up to 8 feet. Adjustable straps and rubber non-skid floor end make installation flexible andf easy with no mounts or bases. Includes a heavy duty carrying case w/shoulder strap.
Height: 4.5
Width: 4.5
Length: 67
Weight: 13.5
STOW ‘N GO DOCK & PATIO STORAGE BOX (TAYLOR)
A durable polyethylene box that’s perfect for your dock, pool or patio. These boxes are manufactured with the highest quality U V-resistant polyethylene resin and is 100% maintenance-free. The double-walled lid is secured with a stainless latch, creating a weather proof design to ensure your contents remain protected and dry.
Height: 24
Width: 26
Length: 44
Weight: 33
HULL GARD® INFLATABLE VINYL FENDER (TAYLOR)
Oval-shaped design minimizes rolling motion and reduces hull rub. Molded-in eyelets withstand the constant pull and tug of everyday usage. Molded-in inflation valves allow you to customize the pressure for maximum effectiveness. Extra soft, tough and shiny. Valve seats are integrally molded into the fender, not glued in.
Height: 6.5
Width: 6.5
Length: 23
Weight: 2.5
STORM GARD FENDERS (TAYLOR)
Our team of engineers has spent countless hours creating our patented True Color pearlescent-infused Storm Gard fenders. Pearlescent color mixes match the most popular colors used in today’s gelcoats and trim. Our patented color enhancement process provides deeper richer colors. Integrated color agents add luster in the sunlight. The ultimate finishing touch for your boat. Made in the USA. Lifetime Guarantee.
Height: 8
Width: 8
Length: 26
Weight: 4.2
ANCHORSHADE III (TAYLOR)
This uniquely designed 6′ x 6′ square, UV treated nylon umbrella can be used on almost any vessel from a small fishing boat to larger high performance boats. It is designed to be used when anchored or at idle speed on a calm day. AnchorShade® III offers improved design features such as stronger, larger diameter solid fiberglass structural ribs and hinge connectors. The aluminum frame is powder coated and has a 4 point locking height up to 8 feet. Adjustable straps and rubber non-skid floor end make installation flexible andf easy with no mounts or bases. Includes a heavy duty carrying case w/shoulder strap.
Height: 4.5
Width: 4.5
Length: 67
Weight: 13.5
PERSONAL WATERCRAFT BUOY (TAYLOR)
Can be used to mark hazards, fishing spots, race course or as fenders. 8″ round. Made of same quality vinyl used in Taylor’s HullGard fenders.
Height: 10
Width: 8
Length: 8
Weight: 1.366
PB B’LASTER PENETRATING CATALYST (PB BLASTER)
Powerful penetrating oil that frees stubborn rusted or immobilized parts. Leaves a protective film after penetration. Displaces moisture. Pinpoint spray nozzle works upside down.
Height: 8
Width: 7.75
Length: 10.75
Weight: 1.05
MOORING SNUBBER (TAYLOR)
Mooring snubbers prevent mooring line breakage along with compensating for sudden jolting and excess stretching of lines beyond parting strength. Made from super elastic isoprene natural rubber snubbers also provide maximum protection against the stress caused by wind, waves, and wakes. No tools needed to install. Locks lines safely and securely. Self-locking internal system eliminates chafing.
Height: 1.5
Width: 5.5
Length: 24
Weight: 1.05
OUTDOOR SOFT COOLERS (COLEMAN)
Soft coolers that won’t collapse under pressure
- Removable hard liner to use with or without ice
- Heat-welded seams prevent leaks
- Front zippered pocket
Height: 12.99
Width: 10.11
Length: 12.36
Weight: 1.51
FENDER CUSHION™ (TAYLOR)
Designed to protect your boat and stay in place while rafting together. Extensively on-water tested. Features 6 molded-in lateral tubes for superior crush resistance, exclusive channel design to prevent pop-out and assure positive locking action along boats’ rub rails, and 2 integral lengthwise tubes to allow more cushions to be tied together for a soft rafting board. Hangs vertically or horizontally. Ideal for tying to piling. Comfortable for sitting. Height allows view over windshield. Never to be used as a life saving device.
Height: 20.690001
Width: 8.81
Length: 20.690001
Weight: 12
BIG B™ INFLATABLE VINYL FENDER (TAYLOR)
These fenders feature a tubular center for end-to-end line passage. Ribbed sides keep fenders in position and minimize roll. Built-in bi-valve allows you to inflate the fender to just the right pressure. Can be hung vertically or horizontally. Recommended inflation is 2 PSI. Extra soft, tough and shiny.
Height: 12
Width: 12
Length: 34
Weight: 14
HULL GARD® INFLATABLE VINYL FENDER (TAYLOR)
Oval-shaped design minimizes rolling motion and reduces hull rub. Molded-in eyelets withstand the constant pull and tug of everyday usage. Molded-in inflation valves allow you to customize the pressure for maximum effectiveness. Extra soft, tough and shiny. Valve seats are integrally molded into the fender, not glued in.
Height: 5.5
Width: 5.5
Length: 20
Weight: 2
DOCK PRO™ INFLATABLE VINYL DOCK WHEEL (TAYLOR)
Rolls with impact to fend off boat. Same soft vinyl as in Taylor fenders. Extra heavy galvanized base with predrilled holes. 12″ and 18″ Wheels use large 2″ dia. axle housing for maximum strength. 3 year warranty.
Height: 12.5
Width: 8.5
Length: 15.75
Weight: 13.5
MODULAR FLAT FENDER (TAYLOR)
Made from closed cell EVA. These fenders will not puncture or absorb water. Their flat design keeps them from rolling or riding up. They can be fastened together with our hook and loop strap to create a modular system. Easy to store. Can also double as a knee pad or seat cushion.
Height: 3
Width: 12
Length: 24
Weight: 4
HULL GARD® INFLATABLE VINYL FENDER (TAYLOR)
Oval-shaped design minimizes rolling motion and reduces hull rub. Molded-in eyelets withstand the constant pull and tug of everyday usage. Molded-in inflation valves allow you to customize the pressure for maximum effectiveness. Extra soft, tough and shiny. Valve seats are integrally molded into the fender, not glued in.
Height: 4.5
Width: 4.5
Length: 16
Weight: 1.166